|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 200 × 200 × 2 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires pre-installation validation of media compatibility, operating pressure, temperature, target flow, and dimensional tolerance. The porous surface must be protected from crushing and contamination, and cleaning must be matched to the process medium.
- Service temperature limit: Do not exceed the recommended service temperature of 300°C.
- Media compatibility review: Confirm media compatibility, operating pressure, temperature, target flow and dimensional tolerance before installation.
- Surface protection: Protect the porous surface from crushing and contamination during storage and handling.
- Cleaning procedure selection: Select backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.
- Fabrication integration: The metallic construction can be cut, welded or machined for assembly integration.
These steps cover pre-installation parameter confirmation and routine handling of the sintered titanium foam sheet. The sequence aims to preserve the porous structure and prevent contamination before and during use.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic cleaner
- Confirm service parameters
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation or installation. - Match PPI and micron rating
Review PPI and micrometre filtration values together when matching the sheet to an assembly. - Protect porous surface
Protect the porous surface from crushing and contamination during storage, transport and handling. - Select cleaning method
Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.
How does the 100 µm filtration rating relate to the 20 PPI pore density in this sintered titanium foam sheet?
The 100 µm filtration rating indicates the particle size retained, while the 20 PPI (pores per inch) describes the cellular structure density. The sheet has an approximate cell spacing of 1.27 mm for the 20 PPI structure and a porosity of 35–45%. The two values are independent: PPI defines the physical foam architecture, and the micron rating defines the filtration precision. Both must be reviewed together when matching the sheet to an assembly.
What key parameters must be verified before integrating this 200×200×2 mm titanium foam sheet into a filtration system?
Before integration, confirm the filtration rating (100 µm), PPI (20), sheet dimensions (200×200×2 mm), material grade (titanium and titanium alloy), target flow, operating pressure, temperature (recommended ≤300°C), and media compatibility. The sheet's corrosion resistance and thermal stability depend on compatible process conditions. A procurement checklist is provided to ensure all parameters are reviewed before quotation.
What cleaning methods are recommended for this sintered porous titanium sheet to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling and cleaning. The metallic construction supports these cleaning methods for reuse.
This 200 × 200 × 2 mm sintered titanium foam sheet combines a 100 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, suiting it for laboratory and engineered filtration, flow distribution, and porous-electrode studies. Its metallic construction permits cutting/welding and cleanable reuse, but media compatibility, operating pressure, and service temperature ≤300°C must be verified before installation.
Positive
- Interconnected porous titanium flow paths: The 35–45% porosity and approximately 1.27 mm cell spacing of the 20 PPI sheet create interconnected through-pore passages that support low flow resistance for gas-solid, liquid-solid, and gas-liquid separation while maintaining a 100 µm filtration rating.
- Cleanable and machine-integrable sintered metal: Because the sheet is formed from titanium powder by high-vacuum sintering, it can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures and can be cut, welded, or machined for assembly integration, enabling reuse across compatible process conditions.
Trade-offs
- Thermal envelope limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require verification before installation. Corrosion resistance is also media-specific and must be confirmed for the intended chemistry.
- Porous surface requires crush and contamination protection: The exposed porous surface must be protected from crushing and contamination during handling and installation, and cleaning method selection depends on the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
