|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 200 × 200 × 1.5 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium foam sheet requires careful handling to prevent crushing or contamination of the open-pore structure. Installation and operation must respect media compatibility, operating pressure, temperature, and dimensional tolerance limits to avoid premature failure.
- Surface protection requirement: Protect the porous surface from crushing and contamination before and during installation.
- Process compatibility review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Cleaning selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Fabrication constraints: Metallic construction allows cutting, welding, and basic machining for assembly integration, but the porous structure should not be crushed during these operations.
These steps describe how to receive, verify, handle, and prepare the sintered porous titanium foam sheet without damaging its open-pore structure. Each action is intended to preserve filtration performance and prevent contamination during integration into a filtration assembly.
Required Equipment: Ultrasonic cleaner, Workshop machining equipment
- Inspect incoming sheet
Inspect the received sheet for deformation, contamination, or visible damage to the porous surface before unpacking or installation. - Confirm process compatibility
Confirm the media compatibility, operating pressure, temperature, target flow, and dimensional tolerance against the intended assembly parameters before proceeding. - Handle by edges
Handle the sheet by its edges and support the flat faces evenly during transfer to avoid crushing the porous structure. - Modify if required
Cut, weld, or machine the sheet for assembly integration using fabrication methods compatible with the sintered porous titanium structure. - Clean before first use
Clean the sheet using backflushing, steam, ultrasonic, or a compatible chemical procedure selected for the process medium and operating procedure.
What is the difference between PPI and filtration rating on this sintered titanium foam sheet, and how do I select the right combination?
PPI (pores per inch) describes the cellular structure and pore density, while the micrometre value (100 µm) specifies the filtration precision—the particle size retained. For this sheet, 20 PPI yields approximately 1.27 mm cell spacing and 35–45% porosity, supporting a 100 µm filtration rating. Both parameters must be reviewed together when matching the sheet to an assembly, as PPI influences flow and mechanical strength, while the filtration rating determines particle cut-off.
Can this sintered titanium foam sheet be cut or welded to fit custom assemblies?
Yes, the metallic titanium-based construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during fabrication. Custom dimensions are available upon consultation, and confirmation of length, width, thickness, PPI, and filtration rating is recommended before ordering.
What are the recommended cleaning methods and maximum service temperature for this titanium foam sheet?
The sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium. The recommended service temperature is ≤300°C. Always verify media compatibility, operating pressure, and temperature before installation to ensure stable performance.
This 100 µm, 20 PPI sintered titanium foam sheet (200 × 200 × 1.5 mm) offers a corrosion-resistant, cleanable metallic porous medium for solid-liquid and gas-liquid separation, with a 35–45% porosity and interconnected flow paths, but requires careful handling to avoid pore crushing and is limited to ≤300°C service temperature.
Positive
- Corrosion-resistant metallic porous structure: Titanium-based construction provides corrosion resistance and thermal stability in compatible media, supporting use in water treatment, chemical processing, and pharmaceutical filtration.
- Cleanable and reusable design: The metallic porous sheet can be cleaned via backflushing, steam, ultrasonic, or compatible chemical procedures, enabling reuse in repeated filtration cycles.
Trade-offs
- Porous surface crush risk: The porous surface must be protected from crushing and contamination during handling and installation, as mechanical damage can compromise filtration integrity.
- Service temperature limit of 300°C: Recommended service temperature is ≤300°C, restricting use in high-temperature processes without additional thermal management or material-grade review.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
