|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 120 × 120 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires media compatibility and dimensional review before installation. Handling and cleaning must preserve its interconnected flow paths and stay within the manufacturer's thermal limit.
- Pre-installation compatibility check: Verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation.
- Surface protection: Protect the porous surface from crushing and contamination during handling and installation.
- Service temperature limit: Do not exceed the manufacturer's stated maximum service temperature when the sheet is in use.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
This procedure covers inspection, compatibility verification, and cleaning of the sintered porous titanium sheet. The steps protect the porous structure and support reuse under compatible process conditions.
Required Equipment: Backflushing, steam, ultrasonic, or chemical cleaning apparatus
- Inspect sheet
Inspect the sheet for visible crushing, contamination, or blocked through-pores before installation. - Verify compatibility
Confirm the application's operating conditions and dimensional fit before installation. - Protect porous surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select cleaning method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure. - Apply cleaning method
Apply the selected cleaning method according to the process medium and operating procedure.
What is the relationship between the 50 µm filtration rating and the 40 PPI pore density in this sintered titanium foam sheet?
The 50 µm filtration rating defines the particle size retention, while the 40 PPI (pores per inch) indicates the cellular structure density. The sheet has a 35–45% porosity with approximately 0.64 mm cell spacing. The combination provides a general filtration range of 0.45–100 µm and pore-size range of 2.5–160 µm, allowing for stable separation and controlled flow with a relative air permeability of 1×10⁻³ L/(cm²·min·Pa).
Can this sintered titanium foam sheet be used for high-temperature gas filtration?
Yes, the recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media. It is suitable for gas purification, steam purification, and other high-temperature filtration applications within that temperature limit.
What are the recommended cleaning and handling methods for this porous titanium sheet?
The porous surface should be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures. The metallic construction can support cutting, welding, and basic machining for assembly integration.
This 50 µm, 40 PPI sintered titanium foam sheet (120 × 120 × 20 mm) offers a 35–45% interconnected porous structure with an estimated bulk density of 2.48–2.93 g/cm³, balancing filtration precision with low flow resistance for solid-liquid, gas-solid, and gas-liquid separation. Its titanium-based construction provides corrosion resistance and thermal stability up to 300°C, but the 20 mm thickness and 0.64 mm cell spacing impose specific dimensional and flow constraints that must be matched to the target assembly.
Positive
- Interconnected porous structure: The 35–45% porosity with interconnected through-pores supports stable separation and controlled flow for solid-liquid, gas-solid, and gas-liquid filtration, while the 40 PPI cellular structure with ~0.64 mm cell spacing provides uniform pore distribution.
- Corrosion and thermal resistance: Titanium-based construction offers corrosion resistance and heat tolerance up to 300°C, enabling use in chemical, petrochemical, and pharmaceutical processes where polymeric filters would degrade.
Trade-offs
- Dimensional and flow constraints: The fixed 120 × 120 × 20 mm sheet size and 50 µm rating require confirmation of target flow, operating pressure, and dimensional tolerance before installation; custom dimensions are only available upon consultation.
- Surface vulnerability and cleaning needs: The porous surface must be protected from crushing and contamination, and cleaning requires backflushing, steam, ultrasonic, or compatible chemical procedures depending on the process medium, adding operational handling requirements.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
