|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 15 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium structure is susceptible to crushing and contamination if the surface is not protected during handling and installation. Media compatibility, operating pressure, temperature, and dimensional tolerance must be verified before use to prevent structural failure or process contamination.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Service Temperature Limit: Recommended service temperature does not exceed 300°C to maintain structural integrity.
- Media Compatibility Verification: Confirm media compatibility with the titanium or titanium-alloy material before installation.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
Inspect the sheet for visible damage before installation and protect the porous surface from crushing or contamination. Verify media compatibility and operating parameters to ensure safe and effective filtration performance.
Required Equipment: Clean gloves, Soft brush or lint-free cloth
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Handle with clean gloves
Handle the sheet using clean gloves to prevent oil or debris from clogging the porous structure. - Verify media compatibility
Verify that the process fluid or gas is compatible with titanium or titanium alloy at the intended operating temperature and pressure. - Install in the assembly
Install the sheet into the filtration assembly, ensuring the porous surface is not subjected to point loads or crushing forces. - Select a cleaning method
Select a cleaning method such as backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
How does the 60 PPI pore density relate to the 50 µm filtration rating in this sintered titanium foam sheet?
The 60 PPI (pores per inch) describes the cellular structure density, while the 50 µm value specifies the filtration precision—the particle size retained. These are independent parameters: PPI governs flow resistance and mechanical strength, whereas the filtration rating determines separation cutoff. For this sheet, the 0.42 mm cell spacing and 35–45% porosity support interconnected flow paths, but the effective filtration performance depends on both values together; review both when matching to an assembly.
What are the key compatibility and integration constraints when using this 160×160×15 mm sintered titanium foam sheet in a filtration assembly?
Media compatibility, operating pressure, temperature, target flow rate, and dimensional tolerances must be reviewed before installation. The sheet is rated for service up to 300°C and can be cut, welded, or machined for integration. The 50 µm filtration rating and 60 PPI structure suit solid-liquid, gas-solid, and gas-liquid separation, but the actual flow and pressure drop depend on the 35–45% porosity and relative air permeability of 1×10⁻³ L/(cm²·min·Pa). Confirm these parameters with your process conditions before quoting.
What are the recommended handling and cleaning procedures to maintain the filtration performance of this 50 µm sintered titanium foam sheet?
Protect the porous surface from crushing and contamination during handling. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, selected based on the process medium and operating procedure. The metallic titanium structure supports repeated cleaning and reuse, but avoid aggressive mechanical abrasion that could alter the 50 µm pore structure or the 35–45% porosity.
This 160 × 160 × 15 mm sintered titanium foam sheet offers 50 µm filtration at 60 PPI with 35–45% porosity and approximately 0.42 mm cell spacing, providing low-resistance interconnected flow paths for liquid and gas separation. The titanium construction supports machining and repeated cleaning, but service is limited to ≤300°C and application fit must be verified against media compatibility, operating pressure, target flow, and dimensional tolerance.
Positive
- Stable 50 µm separation with interconnected porosity: The 60 PPI sintered titanium structure provides 35–45% porosity with approximately 0.42 mm cell spacing, yielding low flow resistance and uniform pore distribution for solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant, reusable titanium construction: High-vacuum sintered titanium supports cutting, welding, and basic machining for assembly integration, and permits backflushing, steam, ultrasonic, or compatible chemical cleaning for reuse in compatible process conditions.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require material-grade and thermal-exposure review before installation.
- Pre-installation compatibility review required: Media compatibility, operating pressure, target flow, and dimensional tolerance must be confirmed before use, and the porous surface must be protected from crushing and contamination during handling and cleaning.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
