|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 160 × 160 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet must be matched to the intended assembly by filtration rating, pore density, dimensions, media compatibility, operating pressure, and temperature before use. The porous surface must be protected from crushing and contamination, and the cleaning method must be selected according to the process medium and operating procedure.
- Media Compatibility Verification: Confirm that the process medium is compatible with sintered titanium and titanium alloy under the intended operating pressure and temperature before installation.
- Thermal Limit: Do not exceed the recommended service temperature of 300 °C without verifying media compatibility under the specific application conditions.
- Dimensional and Filtration Matching: Verify that the 160 × 160 × 10 mm envelope, 50 µm filtration rating, and 30 PPI cellular structure match the assembly requirements before integration.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and assembly to preserve filtration performance.
- Cleaning Procedure Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
Use this procedure to verify configuration and protect the porous structure before installation. Follow the stated compatibility and cleaning guidance to avoid media incompatibility and surface damage.
- Confirm Application Requirements
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before quotation or installation. - Review Pore and Filtration Values
Review the PPI cellular-structure value and the micrometre filtration-precision value together when matching the sheet to an assembly. - Inspect the Porous Surface
Inspect the supplied sheet for crushing, contamination, or dimensional damage before installation. - Position the Sheet
Position the sheet in the assembly without crushing the porous surface. - Select a Cleaning Method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure after service.
How does the 50 µm filtration rating interact with the 30 PPI cellular structure to affect flow rate and particle retention in this sintered titanium foam sheet?
The 50 µm rating defines the filtration precision, while the 30 PPI describes the cellular structure density. The source states that both values must be reviewed together when matching the sheet to an assembly. The relative air permeability is 1 × 10⁻³ L/(cm²·min·Pa) at the given porosity of 35–45%, and the general filtration range is 0.45–100 µm, indicating a trade-off between flow and retention depending on the specific pore size distribution.
Can this sintered titanium foam sheet be welded or machined into a custom assembly?
Yes. The metallic titanium construction supports cutting, welding, and basic machining for assembly integration, as stated in the product description. However, the porous surface must be protected from crushing during fabrication to maintain its structural and filtration integrity.
What cleaning methods are recommended for this 50 µm titanium foam sheet to maintain its filtration performance?
The source recommends backflushing, steam, ultrasonic, or compatible chemical cleaning methods, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination, and the cleaning method should be chosen according to the specific process medium and operating procedure.
This 160 × 160 × 10 mm sintered titanium foam sheet pairs a 50 µm filtration rating with a 30 PPI open-cell structure at 35–45% porosity, providing corrosion-resistant, cleanable porous media for filtration and flow-distribution studies. Its practical operating envelope is bounded by a ≤300°C recommended service temperature and the need to validate media compatibility and dimensional tolerance before installation.
Positive
- Interconnected porosity enables low-resistance flow: The 30 PPI sintered structure provides interconnected through-pore pathways at 35–45% porosity, supporting solid-liquid, gas-solid and gas-liquid separation while preserving open channels for flow.
- Corrosion-resistant titanium allows cleaning and reuse: The titanium-based porous body provides corrosion resistance and thermal stability in compatible media, and it can be cleaned by backflushing, steam, ultrasonic or chemical procedures.
Trade-offs
- Recommended service temperature limited to 300°C: The stated recommended service temperature is ≤300°C; higher-temperature operation should be reviewed with the supplier before installation.
- Porous surface must be protected from crushing: The sheet's porous surface is vulnerable to crushing and contamination during handling, so cleaning methods must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
