|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 120 × 120 × 10 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface is susceptible to crushing and contamination from particulate ingress. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent structural degradation or process failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to maintain structural integrity.
- Cleaning Restriction: Cleaning methods are limited to backflushing, steam, ultrasonic, or compatible chemical procedures to avoid damaging the porous structure.
- Machining Constraint: Cutting, welding, and basic machining are permitted but must be performed with care to preserve the interconnected pore network.
Protect the porous surface from crushing and contamination during handling and installation. Select a cleaning method appropriate for the process medium to maintain filtration performance.
Required Equipment: Backflushing system, Ultrasonic bath, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Perform cleaning
Perform the chosen cleaning procedure to remove trapped particulates without damaging the pore structure. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reinstallation.
What is the relationship between the 50 µm filtration rating and the 40 PPI pore density on this sintered titanium foam sheet, and how does it affect flow resistance and separation efficiency?
The 50 µm filtration rating specifies the particle size retention, while the 40 PPI indicates the pore density (cells per inch). The interconnected porous structure with 35–45% porosity and ~0.64 mm cell spacing provides low flow resistance, as indicated by the relative air permeability of 1×10⁻³ L/(cm²·min·Pa). The combination allows stable separation with controlled flow, but users should review both parameters together for their specific application, as PPI describes the cellular structure and the micrometre value describes filtration precision.
What are the media compatibility and temperature limitations for this sintered titanium foam sheet, and how does it perform in corrosive or high-temperature environments?
The sintered titanium foam sheet offers corrosion resistance and thermal stability in compatible media, with a recommended service temperature of ≤300°C. However, media compatibility must be verified for each application, as titanium alloys can be attacked by certain chemicals (e.g., strong acids at high concentrations). The sheet is suitable for water treatment, chemical processing, pharmaceutical, and food clarification where media compatibility is confirmed.
What cleaning and regeneration methods are recommended for this sintered titanium foam sheet, and can it be machined or welded for integration into assemblies?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid crushing the porous structure. Always protect the surface from contamination during handling.
The 120 × 120 × 10 mm sintered titanium foam sheet is specified with a 50 µm filtration rating and 40 PPI open-cell structure, yielding interconnected 35–45% porosity and a 2.48–2.93 g/cm³ bulk density estimate. Its deployment case centers on corrosion-resistant, cleanable separation, with a 300°C service ceiling and application-specific compatibility checks on media, pressure, flow, and dimensions.
Positive
- 50 µm rating with 40 PPI open-cell structure: The sheet combines 50 µm filtration precision with a 40 PPI cellular architecture and approximately 0.64 mm cell spacing, supporting solid-liquid, gas-solid, and gas-liquid separation while maintaining interconnected flow paths.
- Corrosion-resistant, cleanable metallic media: The sintered titanium structure provides corrosion resistance, heat tolerance, low flow resistance, and cleanability via backflushing, steam, ultrasonic, or compatible chemical procedures, allowing reuse in compatible process conditions.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature process streams must be evaluated against this ceiling despite the titanium-based construction.
- Pre-install process compatibility review required: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before quotation or installation, reflecting application-dependent limits of the porous sheet.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
