|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 120 × 120 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered titanium foam sheet requires protection from surface crushing and contamination to preserve its porous structure. Media compatibility, operating pressure, temperature, and flow must be reviewed before installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Service Temperature Limit: Recommended service temperature is limited to 300°C or less.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures.
- Media Compatibility Review: Media compatibility must be confirmed before installation to avoid corrosion or degradation.
This procedure covers safe handling and cleaning of the sintered titanium foam sheet to maintain filtration performance. Steps are based on the manufacturer's stated handling and cleaning guidance.
Required Equipment: Clean, lint-free gloves, Backflushing apparatus, steam cleaner, ultrasonic bath, or compatible chemical cleaning agents
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before installation. - Handle with clean gloves
Handle the sheet with clean, lint-free gloves to avoid contaminating the porous surface. - Protect the porous surface
Protect the porous surface from crushing or impact during handling and installation. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, ensuring the porous structure is not damaged. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reuse.
How does the 30 PPI pore density relate to the 50 µm filtration rating in this sintered titanium foam sheet?
The product combines a 30 PPI cellular structure with a 50 µm filtration rating. The 30 PPI indicates approximately 0.85 mm cell spacing and 35–45% porosity, providing interconnected flow paths. The 50 µm filtration rating specifies the particle size retention, while the PPI describes the macro-porous structure. Both values must be matched to the application's flow and separation requirements.
What is the maximum operating temperature for this porous titanium foam sheet, and what media compatibility considerations apply?
The recommended service temperature is ≤300°C. The titanium-based structure provides corrosion resistance in compatible media, but specific media compatibility, operating pressure, and temperature must be reviewed before installation. The manufacturer advises confirming these parameters for the target process.
What cleaning and handling procedures are recommended for this sintered titanium foam sheet to maintain performance?
The porous surface should be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid damaging the porous structure.
This sintered porous titanium foam sheet (50 µm filtration rating, 30 PPI, 120 × 120 × 10 mm) offers a corrosion-resistant, cleanable metallic filter medium with interconnected porosity (35–45%) and low flow resistance, suitable for solid-liquid and gas separation in laboratory and engineered assemblies, though its 300°C service temperature limit and sensitivity to surface crushing require careful process integration.
Positive
- Corrosion-resistant titanium construction: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, enabling use in aggressive chemical, pharmaceutical, and water-treatment environments.
- Cleanable and reusable metallic filter: The metallic construction supports backflushing, steam, ultrasonic, and compatible chemical cleaning procedures, allowing repeated use and reduced consumable waste in laboratory and process filtration.
Trade-offs
- Limited service temperature of 300°C: The recommended service temperature is ≤300°C, which restricts use in high-temperature gas filtration or thermal processes exceeding this threshold without material degradation.
- Porous surface vulnerable to crushing: The porous surface must be protected from crushing and contamination during handling and installation, requiring careful assembly practices to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
