|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 120 × 120 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Operate the sintered porous titanium sheet only within its stated service limits and only after confirming compatibility with the process medium. Protect the porous structure from crushing, contamination, and cleaning procedures that are incompatible with the filtration medium.
- Surface Protection: Protect the porous sheet surface from crushing and contamination during handling and storage.
- Thermal Limit: Do not exceed the recommended service temperature of 300°C unless higher-temperature compatibility is verified for the process.
- Compatibility Review: Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or chemical cleaning methods according to the process medium and operating procedure.
Prepare and maintain the sintered porous titanium foam sheet for filtration assembly while avoiding surface damage. This procedure covers pre-installation verification, mounting, and cleaning.
Required Equipment: backflushing system, steam cleaner, ultrasonic cleaner, compatible chemical cleaning reagents
- Inspect Surface
Inspect the porous surface for visible contamination, crushing, or blocked pores before use. - Verify Compatibility
Confirm the target media, operating pressure, temperature, flow, and dimensional fit against the sheet specifications before installation. - Install Sheet
Mount the sheet securely in the filtration assembly without crushing the porous structure. - Clean by Process
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical methods according to the process medium and operating procedure. - Avoid Overheating
Maintain service temperatures at or below 300°C unless higher-temperature compatibility has been verified for the process.
How does the 50 µm filtration rating relate to the 20 PPI cellular structure in this sintered titanium foam sheet?
The 50 µm filtration rating indicates the particle size the sheet can retain, while the 20 PPI (pores per inch) describes the cellular density. The 20 PPI structure yields an approximate cell spacing of 1.27 mm, providing open flow paths with 35–45% porosity. The 50 µm filtration precision is achieved through the interconnected titanium network, not directly by the PPI value. Both parameters must be evaluated together for the intended separation efficiency and flow rate.
What are the operating temperature and media compatibility limits for the Atomfair AF-T20-E1050 sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media. However, specific media compatibility, operating pressure, and target flow must be reviewed before installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and catalyst recovery, but media compatibility should be confirmed per application.
What cleaning and handling procedures are recommended for this porous titanium foam sheet to maintain filtration performance?
The porous surface must be protected from crushing and contamination. Approved cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken not to damage the porous structure.
This sintered porous titanium foam sheet (50 µm filtration rating, 20 PPI, 120 × 120 × 10 mm) offers a corrosion-resistant, cleanable metallic filter medium with interconnected porosity (35–45%) and low flow resistance, suitable for solid-liquid and gas separation in laboratory and engineered assemblies, though its 300°C service temperature limit and sensitivity to surface crushing require careful process integration.
Positive
- Corrosion-resistant metallic porous structure: Titanium-based construction provides corrosion resistance and thermal stability in compatible media, enabling use in aggressive chemical, pharmaceutical, and water-treatment environments.
- Cleanable and reusable filtration medium: The metallic porous sheet supports backflushing, steam, ultrasonic, and chemical cleaning procedures, reducing replacement frequency in continuous filtration operations.
Trade-offs
- Limited service temperature of 300°C: Recommended service temperature is ≤300°C, restricting use in high-temperature gas or thermal processes without exceeding the sintered titanium's structural limits.
- Porous surface vulnerable to crushing: The porous surface must be protected from crushing and contamination during handling and installation, requiring careful assembly procedures to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
