|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered porous titanium foam sheet requires pre-installation review of media compatibility, operating pressure, temperature, flow, and dimensional tolerance. The porous surface must be protected from crushing and contamination, and service temperature should not exceed 300°C.
- Media and operating condition review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Thermal limit: Maintain the recommended service temperature at or below 300°C to avoid compromising the sintered structure.
- Surface protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning protocol selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Filtration configuration review: Review the PPI cellular structure and the micrometre filtration rating together when matching the sheet to an assembly.
These steps cover the verification, mounting, and cleaning of the sintered porous titanium foam sheet in a filtration assembly. Each step is intended to preserve the porous structure and prevent contamination or incompatible process exposure.
Required Equipment: Backflushing equipment, Steam cleaning equipment, Ultrasonic cleaner, Compatible chemical cleaning reagents
- Compatibility verification
Confirm the required filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Surface inspection
Inspect the sheet for visible surface damage, contamination, or blocked pores before mounting. - Mounting
Mount the sheet in the filtration assembly while protecting the porous surface from crushing, point loading, and contamination. - Cleaning
Clean the sheet after use by backflushing, steaming, ultrasonic treatment, or compatible chemical procedures appropriate for the process medium.
How does the 110 PPI cellular structure relate to the 50 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) defines the cellular density with approximately 0.23 mm cell spacing, while the 50 µm filtration rating specifies the particle size retention capability. The interconnected porous structure with 35–45% porosity provides open flow paths, and the filtration rating is an independent parameter that should be matched to the PPI for the intended application. The product's configuration note advises reviewing both values together when integrating the sheet into an assembly.
Can this 50 µm titanium foam sheet be used in high-temperature gas purification processes?
Yes, the sintered titanium foam sheet is recommended for service temperatures up to 300°C, making it suitable for high-temperature gas purification applications. The titanium-based material provides corrosion resistance and thermal stability in compatible media, and the 50 µm filtration rating and 110 PPI structure support gas-solid and gas-liquid separation. However, operating pressure and media compatibility must be reviewed before installation.
What cleaning methods are recommended for this sintered porous titanium sheet to maintain filtration performance over repeated use?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The metallic construction allows these cleaning methods without damaging the porous structure, supporting reuse and consistent filtration performance. It is important to protect the porous surface from crushing and contamination during handling and cleaning.
This 100 × 200 × 5 mm sintered porous titanium foam sheet combines a 50 µm filtration rating with a 110 PPI cellular structure and 35–45% interconnected porosity, making it suitable for lab-scale filtration, gas purification, catalyst recovery, flow-distribution, and porous-electrode studies up to 300°C. Its practical operating envelope depends on confirming media compatibility, pressure, flow, and dimensional tolerance before installation.
Positive
- Interconnected porous titanium network: The 35–45% porosity and interconnected through-pore structure support solid-liquid, gas-solid, and gas-liquid separation with low flow resistance, while the titanium framework provides corrosion resistance and tolerance up to 300°C in compatible media.
- Serviceable metallic construction: The sintered metal sheet can be cut, welded, or machined for assembly integration, and cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, supporting reuse in suitable process conditions.
Trade-offs
- Fragile porous surface: The 5 mm sheet's porous surface must be protected from crushing and contamination during handling; cleaning methods should be selected according to the process medium and operating procedure.
- Application compatibility must be verified: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation, and the 110 PPI cellular structure and 50 µm filtration precision should be evaluated together when matching the sheet to an assembly.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
