Sintered Porous Titanium Foam Sheet 50μm 30 PPI ATOMFAIR®

$110.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet with 50 μm filtration, 30 PPI structure, 100 × 100 × 5 mm size and 35–45% porosity. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 100 × 5 mm, 30 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 50 µm filtration rating with a 30 PPI cellular structure in a 100 × 100 × 5 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 0.85 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 100 × 100 × 5 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T30-A0550
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	50 µm
Sheet Size	100 × 100 × 5 mm
Thickness	5 mm
Pore Density	30 PPI
Approximate Cell Spacing	0.85 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	1 × 10^-3 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

50 µm filtration precision paired with a 30 PPI porous-cell structure.
100 × 100 × 5 mm sheet supplied as one piece.
Cell spacing is approximately 0.85 mm for the 30 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 50 µm, 30 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 100 × 100 × 5 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This sintered titanium foam sheet is rated for service temperatures up to 300°C and requires media compatibility review before installation. The porous surface must be protected from crushing and contamination, and cleaning should be selected according to the process medium.

Temperature Limit: Do not exceed 300°C service temperature to avoid structural degradation.
Media Compatibility: Confirm media compatibility, operating pressure, and temperature before quotation or installation.
Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
Cleaning Method: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
Configuration Matching: Review both the PPI cellular structure and the micrometre filtration rating when matching the sheet to an assembly.

FAQ

How does the 30 PPI cellular structure relate to the 50 µm filtration rating in this sintered titanium foam sheet?

The 30 PPI (pores per inch) describes the cellular structure with an approximate cell spacing of 0.85 mm, while the 50 µm filtration rating indicates the particle retention size. The sheet's 35–45% porosity and interconnected pore structure provide a balance between filtration precision and flow permeability. Both values should be reviewed together to match the sheet to the target assembly's requirements.

What are the maximum service temperature and media compatibility considerations for this porous titanium sheet?

The recommended service temperature is ≤300°C. Media compatibility must be reviewed before installation, as the titanium-based structure provides corrosion resistance in compatible media. The sheet is suitable for applications such as water treatment, chemical processing, pharmaceutical, food clarification, gas purification, and catalyst recovery, but operating pressure, temperature, and target flow should be confirmed before quotation.

What cleaning methods are recommended for this sintered porous titanium foam sheet to maintain its filtration performance?

The metallic porous structure can be cleaned by backflushing, steam cleaning, ultrasonic cleaning, or compatible chemical procedures. The porous surface should be protected from crushing and contamination during handling. The choice of cleaning method depends on the process medium and operating procedure.

Assessment

This 100 × 100 × 5 mm sintered porous titanium foam sheet pairs a 50 µm filtration rating with a 30 PPI cellular structure and 35–45% porosity, providing interconnected metallic flow paths for solid-liquid, gas-solid, and gas-liquid separation trials. Deployment is constrained by the ≤300°C recommended service temperature and the stated requirement to verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.

Positive

Interconnected porous titanium architecture: High-vacuum sintered titanium with 35–45% porosity and approximately 0.85 mm cell spacing creates interconnected through-pore flow paths that support solid-liquid, gas-solid, and gas-liquid separation with uniform pore distribution.
Corrosion-resistant and cleanable metallic media: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, allowing reuse under suitable process conditions.

Trade-offs

Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so applications requiring higher-temperature filtration, gas purification, or thermal-management operation are outside the stated operating envelope.
Installation parameters require pre-verification: Media compatibility, operating pressure, target flow, and dimensional tolerance must be confirmed before installation, and the porous surface must be protected from crushing and contamination during handling and cleaning.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).