|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 200 × 200 × 2 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the handling, compatibility, and cleaning constraints for the sintered titanium porous foam sheet. It does not replace assembly-level engineering review of the filtration system.
- Service Temperature Limit: Keep the sintered sheet's service temperature at or below 300°C in the intended process environment.
- Media and Process Compatibility: Confirm media compatibility, operating pressure, target flow, and dimensional tolerance with the supplier before installation.
- Porous Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning Procedure Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Structural Rating Matching: Match both the PPI cellular rating and the micrometre filtration rating to the assembly requirements to avoid misapplication.
This procedure covers the inspection, handling, installation, and cleaning of a sintered titanium porous foam sheet used as a filter medium. It applies to laboratory trials and engineered filtration assemblies where the sheet is mounted for separation.
Required Equipment: Filter housing with sealing surfaces, Backflushing equipment, Steam cleaning equipment, Ultrasonic cleaning equipment
- Inspect for Damage
Inspect the sheet for visible contamination, crushing, or dimensional damage before installation. - Confirm Ratings
Confirm the required filtration rating, PPI, and sheet dimensions against the filter assembly specification before mounting. - Protect Porous Faces
Handle the sheet by its edges and support the flat faces to protect the porous structure from crushing. - Install in Housing
Install the sheet in the filter housing with media-compatible sealing and support to prevent leakage or bypass. - Select Cleaning Method
Clean the sheet by backflushing, steam, ultrasonic, or chemical procedures compatible with the process medium and operating procedure.
How does the 50 µm filtration rating relate to the 20 PPI pore density on this sintered titanium foam sheet?
The 20 PPI (pores per inch) describes the cellular pore density, corresponding to approximately 1.27 mm cell spacing, while the 50 µm filtration rating indicates the particle size cut-off for separation. These parameters are independent but complementary: PPI affects flow and structural properties, while the micron rating determines filtration precision. Both must be reviewed together when matching the sheet to an assembly, as stated in the product's configuration note.
What are the operating temperature limits and material compatibility considerations for this titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but specific chemical compatibility, operating pressure, and temperature must be reviewed before installation, as emphasized in the product's procurement check. The material is manufactured from titanium or titanium-alloy powder via high-vacuum sintering.
What cleaning and handling procedures are recommended to preserve the porous structure of this titanium foam sheet?
The porous surface must be protected from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care is required to avoid damaging the interconnected porous flow paths.
This sintered titanium foam sheet provides 50 µm filtration precision with a 20 PPI interconnected porous structure in a 200×200×2 mm format, combining corrosion resistance and cleanability for liquid-gas separation, but is limited to ≤300°C service and requires handling care to avoid pore damage.
Positive
- Corrosion-resistant titanium framework: Titanium construction provides corrosion resistance and thermal stability in compatible media, supporting use in chemical, petrochemical, and pharmaceutical filtration.
- Cleanable and reusable porous structure: Backflushing, steam, ultrasonic, and chemical cleaning options allow regeneration and extended service life, reducing replacement frequency.
Trade-offs
- Limited service temperature ≤300°C: The recommended maximum service temperature of 300°C restricts use in high-temperature gas filtration, molten media, or thermal management applications exceeding this threshold.
- Surface sensitive to crushing and contamination: The porous surface must be protected from mechanical impact and debris during handling, cleaning, and assembly to maintain filtration performance and pore integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
