|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 160 × 160 × 15 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent corrosion or structural failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid degradation of the sintered titanium structure.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures depending on the process medium.
- Mechanical Handling: Cutting, welding, and basic machining are supported for assembly integration but must avoid crushing the porous surface.
Inspect the sheet for damage before installation and confirm dimensional fit within the filtration assembly. Clean the sheet periodically using backflushing, steam, ultrasonic, or chemical methods based on the process medium.
Required Equipment: Ultrasonic cleaner, Backflushing system
- Inspect the sheet
Inspect the porous titanium sheet for visible damage, crushing, or contamination before installation. - Confirm media compatibility
Confirm that the process medium, operating pressure, and temperature are within the sheet's rated limits. - Install the sheet
Install the sheet into the filtration assembly, ensuring a secure seal without over-compressing the porous surface. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Perform cleaning
Perform cleaning at regular intervals to maintain flow and filtration performance.
How do the 60 PPI pore density and 30 µm filtration rating relate in this sintered titanium foam sheet, and why must both be specified together?
The 60 PPI (pores per inch) describes the cellular structure's pore density, while the 30 µm value specifies the filtration precision (particle retention size). According to the product details, both parameters must be reviewed together when matching the sheet to an assembly because they independently affect flow resistance and separation efficiency; the sheet also has a 35–45% porosity range with approximately 0.42 mm cell spacing to support interconnected flow paths.
What is the maximum operating temperature for this sintered titanium foam sheet, and what media compatibility considerations apply?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability, but media compatibility must be reviewed before installation because operating pressure, temperature, target flow, and the specific process medium (e.g., chemical, pharmaceutical, seawater) can affect performance and longevity. The sheet is suitable for water treatment, chemical processing, gas purification, and other applications listed in the scope.
What cleaning and handling procedures are recommended for maintaining the 30 µm sintered titanium foam sheet?
The porous surface must be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, or compatible chemical cleaning, depending on the process medium and operating procedure. The product's metallic construction also supports cutting, welding, and basic machining for integration, but care must be taken to avoid damaging the porous structure.
This Atomfair AF-T60-D1530 sintered porous titanium foam sheet (160 × 160 × 15 mm) combines a 30 µm filtration rating with a 60 PPI structure and 35–45% porosity, providing low-resistance, corrosion-tolerant separation for laboratory and engineered assemblies. Evaluation confirms a ≤300°C service ceiling and the need for handling and compatibility checks before installation.
Positive
- Interconnected low-resistance porous structure: The 35–45% porosity and approximately 0.42 mm cell spacing in the 60 PPI structure maintain interconnected flow paths, with a relative air permeability of 5 × 10^-4 L/(cm²·min·Pa), supporting solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant and cleanable titanium media: The sintered titanium framework provides corrosion resistance and thermal stability in compatible media, and supports backflushing, steam, ultrasonic, and compatible chemical cleaning as well as cutting, welding, and basic machining for assembly.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so the sheet should not be deployed in higher-temperature filtration or thermal-management processes without explicit engineering review.
- Porous surface requires handling protection: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
