|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 160 × 160 × 15 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium porous component requires protection from mechanical deformation and contamination before installation. The open metallic structure must be matched to the process media, operating pressure, temperature, and target flow before use.
- Mechanical Integrity: Avoid crushing or point loading the porous surface during handling, cutting, or assembly to prevent pore collapse.
- Process Compatibility: Confirm media compatibility, operating pressure, temperature, and target flow before installation because the sheet has no stated tolerance for incompatible or overpressure conditions.
- Service Temperature: Maintain the service temperature at or below 300°C to avoid exceeding the manufacturer's recommended limit.
- Cleaning and Fouling: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure because fouling or incompatible cleaning may damage the porous structure.
Inspect and protect the porous sheet before assembling it into a filtration or flow-distribution system. Clean the sheet by a method matched to the process medium and operating procedure.
Required Equipment: Ultrasonic cleaner
- Confirm configuration
Confirm the filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Inspect surface
Inspect the porous surface for crushing, contamination, or damage before assembly. - Protect porous surface
Protect the porous surface from crushing and contamination while mounting the sheet into the assembly. - Mount in assembly
Mount the sheet in the assembly without applying point loads to the porous surface. - Clean after use
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the 20 PPI pore density relate to the 30 µm filtration rating in this sintered titanium foam sheet?
The 20 PPI (pores per inch) defines the cellular structure's cell spacing of approximately 1.27 mm, while the 30 µm filtration rating indicates the particle size cutoff. The product combines these two parameters to allow both coarse structural support and fine filtration, but the actual flow and separation behavior depends on the interconnected porosity (35–45%) and relative air permeability of 5 × 10⁻⁴ L/(cm²·min·Pa). Higher PPI would increase filtration precision but reduce flow, so both values must be reviewed together when matching the sheet to an assembly.
What are the maximum service temperature and media compatibility considerations for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, temperature, and target flow must be reviewed before quotation or installation. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, but aggressive chemicals may affect the material and should be verified against the process medium.
What handling and cleaning procedures are recommended to maintain the integrity of this porous titanium foam sheet?
The porous surface must be protected from crushing and contamination during handling and storage. Cleaning can be performed via backflushing, steam, ultrasonic, or compatible chemical methods, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken not to damage the porous structure.
This 160 × 160 × 15 mm sintered titanium foam sheet provides 30 µm filtration through a 20 PPI interconnected porous structure with 35–45% porosity for solid-liquid, gas-solid, and gas-liquid separation within a ≤300°C service envelope. The powder-formed, high-vacuum sintered titanium body is corrosion resistant and cleanable, but the open porous surface requires handling protection against crushing and contamination.
Positive
- Interconnected porous flow paths: The 20 PPI structure with 35–45% porosity and approximately 1.27 mm cell spacing provides interconnected through-pore pathways with low flow resistance for liquid and gas separation.
- Corrosion-resistant and cleanable titanium: Sintered titanium construction provides corrosion resistance and thermal stability within the stated ≤300°C service temperature, and can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require a different material selection or additional engineering review.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and cleaning methodology must be matched to the process medium to avoid damaging the open-cell structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
