|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 10 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires controlled handling to preserve its open-cell structure and filtration performance. Media compatibility, operating pressure, temperature, and cleaning method must be verified before use.
- Mechanical Handling: Protect the porous surface from crushing and contamination during handling, installation, and storage.
- Process Compatibility: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Service Temperature: Do not exceed the recommended 300°C service temperature for this sintered porous titanium sheet.
- Cleaning Protocol: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Integration: Apply cutting, welding, or basic machining only where the metallic porous structure permits the required assembly integration.
This procedure covers safe handling, installation, and cleaning of the sintered porous titanium sheet. It is intended to prevent damage to the porous structure and ensure compatibility with the process environment.
Required Equipment: Ultrasonic cleaner, Steam cleaning equipment, Backflushing apparatus
- Inspect the sheet
Inspect the received sheet for visible deformation, contamination, or damage to the porous surface. - Verify process compatibility
Verify that the intended media, operating temperature, pressure, and flow conditions are compatible with the sintered titanium construction. - Install the sheet
Install the sheet into the assembly without applying point loads or crushing forces to the porous structure. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or a compatible chemical procedure selected for the process medium.
How does the 30 µm filtration rating relate to the 60 PPI cellular structure in this sintered titanium foam sheet?
The 30 µm filtration rating specifies the particle size retained, while the 60 PPI (pores per inch) describes the cellular density. The 60 PPI structure yields approximately 0.42 mm cell spacing and 35–45% porosity, creating interconnected pathways that balance filtration precision with low flow resistance. This combination allows the sheet to retain 30 µm particles while maintaining a relative air permeability of 5 × 10⁻⁴ L/(cm²·min·Pa) and supporting a general filtration range of 0.45–100 µm.
What are the temperature and media compatibility limits for this porous titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based construction provides corrosion resistance in compatible media, but specific chemical compatibility must be reviewed for the intended process conditions. The sheet is suitable for applications in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, and oil filtration, though media compatibility, operating pressure, and target flow should be confirmed before installation.
How should this sintered titanium foam sheet be cleaned and handled to maintain its filtration performance?
Cleaning options include backflushing, steam, ultrasonic, or compatible chemical procedures, chosen according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid damaging the interconnected porous structure.
This 120 × 120 × 10 mm sintered titanium foam sheet pairs a 30 µm filtration rating with a 60 PPI cellular structure and 35–45% interconnected porosity, making it suitable for liquid/gas separation, catalyst recovery, flow distribution, and porous-electrode studies up to 300°C.
Positive
- Sintered interconnected porosity enables low-resistance flow: High-vacuum sintered titanium produces 35–45% open, interconnected porosity with roughly 0.42 mm cell spacing, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Machinable and cleanable metallic filter media: The metallic construction permits cutting, welding, and basic machining for assembly integration, and supports backflushing, steam, ultrasonic, or compatible chemical cleaning for reuse.
Trade-offs
- Service temperature capped at 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require explicit material-grade, pressure, and application review before installation.
- Porous surface vulnerable to crushing and contamination: The porous surface must be protected from crushing and contamination during handling and storage, and the cleaning method must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
