|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 10 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium foam sheet must not be used at service temperatures exceeding 300°C. The porous surface requires protection from crushing and contamination, and cleaning methods must be selected according to the process medium and operating procedure.
- Temperature Limit: The sheet is rated for continuous service up to 300°C, above which structural integrity may degrade.
- Handling Protection: The porous surface must be protected from physical crushing and contamination during handling, installation, and cleaning.
- Cleaning Compatibility: Backflushing, steam, ultrasonic, or chemical cleaning methods may be used, but must be confirmed compatible with the process medium and operating procedure.
- Pre-Installation Review: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
- Filtration Constraint: The 30 µm filtration rating and 40 PPI cellular structure must be matched to the required particle separation and flow characteristics.
How does the 30 µm filtration rating interact with the 40 PPI pore density in this sintered titanium foam sheet, and what are the trade-offs for flow rate versus filtration precision?
The 30 µm filtration rating defines the particle size cutoff, while the 40 PPI (pores per inch) indicates the cellular density with approximately 0.64 mm cell spacing. The sheet's 35–45% porosity and relative air permeability of 5 × 10⁻⁴ L/(cm²·min·Pa) support a balance: finer filtration (30 µm) with a 40 PPI structure provides moderate flow resistance. Higher PPI (finer cells) would increase filtration precision but reduce permeability, whereas lower PPI would increase flow at the expense of precision. Both values must be matched to the application's target flow and particle retention requirements.
What are the maximum service temperature and media compatibility considerations for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure offers corrosion resistance and thermal stability in compatible media, but actual compatibility depends on the specific chemical environment, operating pressure, and temperature. Media compatibility must be reviewed before installation; the sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and oil filtration applications where titanium is inert.
What cleaning and handling procedures are recommended for this porous titanium sheet to maintain its filtration performance and structural integrity?
The porous surface must be protected from crushing and contamination. Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for integration, but care should be taken to avoid deforming the porous structure.
This 30 µm, 40 PPI sintered titanium foam sheet provides an interconnected 35–45% porosity network in a 120 × 120 × 10 mm format, combining low flow resistance with corrosion resistance and a recommended service temperature of ≤300°C for laboratory filtration and porous-media studies.
Positive
- Interconnected 35–45% porosity network: The 40 PPI foam has approximately 0.64 mm cell spacing and interconnected through-pore paths, supporting low-resistance solid-liquid, gas-solid, and gas-liquid separation at a 30 µm filtration rating.
- Corrosion-resistant, cleanable metallic structure: Sintered titanium provides corrosion resistance and thermal stability in compatible media, and the sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- 300°C recommended service ceiling: The documented recommended service temperature is ≤300°C, so higher-temperature gas, steam, or thermal-management operation would fall outside the stated operating envelope.
- Porous surface needs crush and contamination protection: The open porous structure must be protected from mechanical crushing and contamination; cleaning method selection must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
