|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 160 × 160 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the handling, compatibility, and processing constraints for the sintered porous titanium foam sheet. It is intended for laboratory and engineering use where media compatibility and operating limits have been verified.
- Media and operating compatibility review: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
- Surface protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Service temperature limit: The recommended service temperature must not exceed 300°C.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning based on the process medium and operating procedure.
- Assembly integration processing: The metallic construction can support cutting, welding, and basic machining for assembly integration.
These steps guide the user through initial handling, configuration review, and cleaning preparation for the sintered porous titanium foam sheet. Follow them to avoid surface damage and to confirm the sheet is appropriate for the intended installation.
Required Equipment: Backflushing apparatus, Steam cleaner, Ultrasonic bath, Chemical cleaning system compatible with process medium
- Protect the porous surface
Protect the porous surface from crushing and contamination during handling and storage. - Verify configuration
Review the PPI and micron filtration rating together when matching the sheet to the target assembly. - Select cleaning method
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the 30 PPI cellular structure relate to the 30 µm filtration rating on this sintered titanium foam sheet?
The 30 PPI value describes the cellular pore density (pores per inch), while the 30 µm rating specifies the filtration precision (particle retention size). These are independent parameters; the product's configuration note explicitly states that PPI describes the cellular structure and the micrometre value describes filtration precision, and advises reviewing both together when matching the sheet to an assembly.
What are the recommended service temperature and approved cleaning methods for this 30 µm titanium foam sheet?
The recommended service temperature is ≤300°C. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, as stated in the handling and cleaning guidance. Protection of the porous surface from crushing and contamination is also advised.
Can this sintered titanium foam sheet be cut, welded, or machined for integration into an existing assembly?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The product description notes that the titanium-based porous structure can be machined, but the porous surface must be protected from crushing and contamination during any fabrication steps.
This 160 × 160 × 5 mm sintered porous titanium foam sheet combines a 30 µm filtration rating with a 30 PPI interconnected cellular structure and 35–45% porosity, making it suitable for lab-scale filtration, flow-distribution, and porous-electrode evaluations. Its practical deployment is bounded by a ≤300°C service ceiling and the need to protect the porous surface from crushing and contamination during handling and cleaning.
Positive
- Sintered open-cell titanium structure: High-vacuum sintering of titanium or titanium-alloy powder produces interconnected through-pore passages with 35–45% porosity and approximately 0.85 mm cell spacing, supporting liquid and gas flow at a specified 30 µm filtration rating.
- Corrosion-resistant and cleanable metal foam: The titanium-based porous structure offers corrosion resistance and thermal stability in compatible media, and its metallic construction permits cleaning via backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature filtration or thermal-management applications require a different material selection and verification of media compatibility.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination during handling and cleaning, and media compatibility, operating pressure, target flow, and dimensional tolerance must be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
