|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium and operating procedure.
- Temperature Constraint: Recommended service temperature does not exceed 300°C to maintain structural and filtration performance.
- Media Compatibility Constraint: Media compatibility must be confirmed before installation to avoid corrosion or degradation of the titanium framework.
- Mechanical Handling Constraint: The porous surface must be protected from crushing during handling and assembly to prevent pore collapse.
- Cleaning Procedure Constraint: Cleaning method must be matched to the process medium and operating procedure to avoid damaging the interconnected pore structure.
This procedure describes safe handling and installation of the sintered titanium foam sheet for filtration or separation applications. Proper steps prevent pore damage and ensure media compatibility before system integration.
Required Equipment: Clean, lint-free gloves, Soft, non-abrasive support surface
- Inspect the sheet
Inspect the sheet visually for any visible damage, deformation, or contamination before handling. - Don clean gloves
Don clean, lint-free gloves to prevent oil or particulate contamination of the porous surface. - Place on a soft surface
Place the sheet on a soft, non-abrasive support surface to avoid crushing the porous structure. - Confirm media compatibility
Confirm that the process media is compatible with titanium and the operating temperature does not exceed 300°C. - Install into assembly
Install the sheet into the filtration assembly using gentle, even pressure to avoid localized deformation. - Verify flow direction
Verify that the flow direction aligns with the sheet orientation to prevent back-pressure damage.
What is the relationship between the 110 PPI pore density and the 30 µm filtration rating, and how does this affect flow resistance?
The 110 PPI structure with approximately 0.23 mm cell spacing and 35–45% porosity provides interconnected pathways. The 30 µm filtration rating is the particle retention size, while PPI describes the cellular architecture. The relative air permeability is 5 × 10⁻⁴ L/(cm²·min·Pa), indicating low flow resistance despite fine filtration, supported by the open-pore structure.
What are the maximum service temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, and temperature must be reviewed before installation. The product is made from titanium and titanium alloy, suitable for many chemical, pharmaceutical, and water treatment applications.
What cleaning and machining options are available for this porous titanium sheet without damaging its structure?
The metallic construction supports cutting, welding, and basic machining for assembly integration. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during handling to preserve the interconnected pore structure.
This 30 µm, 110 PPI sintered titanium foam sheet (200×200×5 mm) offers corrosion resistance and thermal stability up to 300°C with interconnected porosity for filtration, but requires careful handling to avoid surface damage and must be evaluated for media compatibility and operating conditions.
Positive
- Corrosion resistance and thermal stability: The titanium-based porous structure provides corrosion resistance in compatible media and can withstand recommended service temperatures up to 300°C, suitable for aggressive chemical and thermal process environments.
- Machinable and cleanable construction: The metallic construction supports cutting, welding, and basic machining for assembly integration, and can be cleaned via backflushing, steam, ultrasonic, or chemical methods, enabling reuse in lab and industrial settings.
Trade-offs
- Temperature limit of 300°C: The recommended service temperature is ≤300°C, which restricts use in high-temperature applications above this threshold without risk of structural degradation or loss of filtration integrity.
- Fragile porous surface: The porous surface must be protected from crushing and contamination during handling and installation, as mechanical damage can compromise the interconnected pore structure and filtration performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
