|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium sheet must be protected from surface crushing, contamination, and deformation during handling and storage. Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Surface protection: Protect the porous surface from crushing and contamination during handling and storage.
- Compatibility review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Filtration rating pairing: Review PPI and micrometre filtration rating together when matching the sheet to an assembly.
- Cleaning procedure selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Machining and assembly integration: Use cutting, welding, or basic machining for assembly integration only after confirming the porous structure and dimensional fit are preserved.
This procedure covers safe handling and preparation of a sintered porous titanium foam sheet before installation or service. The steps prevent surface damage and contamination while confirming operating compatibility with the intended assembly.
Required Equipment: Backflushing apparatus, Ultrasonic bath, Steam cleaning equipment
- Confirm compatibility
Verify that the process medium, operating pressure, temperature, and flow rating are compatible with the titanium sheet before handling or installation. - Inspect the sheet
Inspect the porous sheet for crushing, contamination, or deformation before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during transfer and assembly. - Clean as required
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical procedures according to the process medium and operating procedure. - Install with dimensional check
Install the sheet in the assembly after verifying dimensional fit and preserving the porous structure.
How does the 30 µm filtration rating relate to the 30 PPI cellular structure, and what trade-off between flow rate and particle retention should be expected?
The 30 µm filtration rating defines the particle size capture threshold, while 30 PPI (pores per inch) describes the cellular structure density with approximately 0.85 mm cell spacing. The 35–45% porosity and interconnected open-pore structure provide low flow resistance (relative air permeability 5×10⁻⁴ L/(cm²·min·Pa)), but finer filtration ratings typically reduce flow capacity. For this specific sheet, the combination supports solid-liquid, gas-solid, and gas-liquid separation with a general filtration range of 0.45–100 µm and air permeability range of 1.5–800 m³/(h·m²·kPa). Review both PPI and µm values together when matching to an assembly.
What are the maximum operating temperature and media compatibility limits for this sintered titanium foam sheet?
The recommended maximum service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability, but media compatibility must be confirmed before installation. The product is suitable for water treatment, chemical processing, pharmaceutical, food clarification, gas purification, catalyst recovery, and desalination pretreatment, provided the process media does not exceed the temperature limit and is compatible with titanium. Operating pressure, temperature, and target flow should be reviewed before quotation.
What cleaning methods are recommended for this sintered porous titanium sheet without damaging its structure?
Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling and cleaning. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid damaging the interconnected porous structure.
This 200 × 200 × 5 mm sintered titanium foam sheet provides a 30 µm filtration rating within a 30 PPI cellular structure at 35–45% porosity, supporting interconnected liquid and gas flow paths for filtration and flow-distribution work. Deployment is constrained by a 300°C service ceiling and the need to validate media compatibility and operating parameters before installation.
Positive
- Interconnected 35–45% porous titanium network: Powder forming and high-vacuum sintering produce interconnected passages at 35–45% porosity and roughly 0.85 mm cell spacing, giving low flow resistance and open paths for solid-liquid, gas-solid, and gas-liquid separation at a 30 µm rating.
- Corrosion-resistant and cleanable metallic media: The titanium-based porous sheet combines corrosion resistance, heat tolerance, and cleanability by backflushing, steam, ultrasonic, or compatible chemical methods, supporting reuse in compatible process conditions.
Trade-offs
- Service temperature ceiling of 300°C: The recommended service temperature is ≤300°C, so elevated-temperature filtration, gas purification, or thermal-management use must remain within this operating envelope.
- Porous surface demands crush and contamination protection: Handling instructions require protecting the porous surface from crushing and contamination; cleaning should be selected from backflushing, steam, ultrasonic, or chemical methods according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
