|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered titanium foam sheet requires protection from surface crushing and contamination to preserve its porous structure. Media compatibility, operating pressure, temperature, and flow must be reviewed before installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Service Temperature Limit: Do not exceed the recommended service temperature of 300°C in process applications.
- Cleaning Compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning methods based on process medium compatibility.
- Process Verification: Confirm media compatibility, operating pressure, temperature, and target flow before installation.
This procedure covers the safe integration and cleaning of the sintered titanium foam sheet for filtration or flow-distribution applications. Steps focus on surface protection, installation, and maintenance.
Required Equipment: Clean, lint-free gloves, Ultrasonic bath or backflushing system
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before installation. - Handle with care
Handle the sheet by its edges using clean gloves to avoid crushing or contaminating the porous surface. - Verify compatibility
Verify that the process media, operating pressure, and temperature are within the sheet's rated limits. - Install the sheet
Install the sheet into the filtration assembly, ensuring a proper seal and support to prevent mechanical stress. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods as dictated by the process medium.
How does the 30 µm filtration rating relate to the 20 PPI pore density in this sintered titanium foam sheet?
The 30 µm filtration rating specifies the particle retention precision, while the 20 PPI (pores per inch) describes the cellular structure's pore density. The 20 PPI structure yields an approximate cell spacing of 1.27 mm and a porosity of 35–45%, providing interconnected flow paths. These two metrics are independent and must be evaluated together when matching the sheet to a filtration assembly, as stated in the product's configuration note.
What is the maximum recommended operating temperature for the Atomfair AF-T20-C0330 sintered titanium foam sheet?
The recommended service temperature is ≤300°C, as specified in the technical specifications. The titanium-based porous structure provides thermal stability within this limit, but operating pressure, media compatibility, and dimensional tolerance should also be reviewed before installation.
What cleaning methods are recommended for this porous titanium foam sheet?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, as stated in the Handling & Cleaning note. The porous surface should be protected from crushing and contamination during cleaning, and the method should be chosen based on the process medium and operating procedure.
The 200 × 200 × 3 mm sintered titanium foam sheet with a 30 µm filtration rating and 20 PPI open-cell structure provides an interconnected porous medium suited to liquid–solid, gas–solid, and gas–liquid separation, but its ≤300 °C service ceiling and crush-sensitive surface require application-specific installation review.
Positive
- Interconnected porous flow paths: The 35–45% porosity with interconnected through-pores and approximately 1.27 mm cell spacing supports solids and gas filtration while the metallic porous structure contributes low flow resistance.
- Machinable and cleanable titanium media: The titanium-based construction can be cut, welded, or basic-machined for assembly integration, and supports backflushing, steam, ultrasonic, or compatible chemical cleaning for reuse in compatible process conditions.
Trade-offs
- 300 °C recommended service ceiling: The product is rated for recommended service temperatures up to 300 °C, so higher-temperature processes are outside the stated operating envelope and must be verified before installation.
- Crush-sensitive surface and compatibility checks: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
