|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 2.8 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the operating, handling, and cleaning constraints for the sintered porous titanium sheet. Adherence to these constraints preserves the porous structure and prevents service-related failure.
- Service temperature limit: Do not exceed the recommended service temperature of 300°C during use.
- Compatibility review: Review media compatibility, operating pressure, target flow, and dimensional tolerance before quotation or installation.
- Mechanical protection: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning procedure: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly integration: Cut, weld, or machine the sheet using basic methods for assembly integration when the metallic structure allows.
This procedure describes the required handling, installation review, and cleaning sequence for the porous titanium sheet. Follow these steps to preserve the porous structure and maintain filtration performance.
- Review operating conditions
Review media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and storage. - Clean according to process
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How do the 30 µm filtration rating and 20 PPI pore density relate to each other in this sintered titanium foam sheet?
The 30 µm filtration rating indicates the particle size retention precision, while the 20 PPI (pores per inch) describes the cellular structure and porosity. The product configuration note advises reviewing both values together when matching the sheet to an assembly, as the 20 PPI structure with 35–45% porosity provides interconnected flow paths, but the actual filtration rating is 30 µm. The approximate cell spacing is 1.27 mm, and the air permeability is 5×10⁻⁴ L/(cm²·min·Pa).
What is the maximum recommended service temperature for this porous titanium sheet?
The recommended service temperature is ≤300°C, as stated in the technical specifications. The titanium-based metallic structure provides thermal stability within this limit, but operating pressure, media compatibility, and target flow must also be reviewed before installation. The manufacturing process of powder forming and high-vacuum sintering contributes to its thermal tolerance.
What cleaning procedures are recommended for maintaining the filtration performance of the sintered titanium foam sheet?
The recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical cleaning procedures. The product's handling instructions emphasize protecting the porous surface from crushing and contamination. The choice of cleaning method should be based on the process medium and operating procedure, and the titanium construction supports these techniques without degrading the porous structure.
This sintered porous titanium foam sheet combines a 30 µm filtration rating with a 20 PPI cellular structure in a 200 × 200 × 2.8 mm format, providing 35–45% interconnected porosity for solid-liquid, gas-solid, and gas-liquid separation up to 300°C service temperature.
Positive
- Interconnected 35–45% porosity with low flow resistance: The 20 PPI foam structure with approximately 1.27 mm cell spacing leaves interconnected through-pore paths for liquids and gases, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant, cleanable titanium construction: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media up to 300°C, and the metallic sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require media-compatibility and design review before installation.
- Porous surface requires handling protection: The porous surface must be protected from crushing and contamination, and the cleaning method — backflushing, steam, ultrasonic, or chemical — must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
