|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 160 × 160 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium foam sheet must be protected from crushing and contamination before and during installation. Media compatibility, operating pressure, temperature, and cleaning method must be confirmed before use.
- Crushing and contamination protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Media and operating condition review: Confirm that the process medium, operating pressure, and temperature are compatible with the titanium structure.
- Thermal service limit: Maintain service temperature at or below the recommended 300°C limit.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly integration: Use cutting, welding, or basic machining only as needed for assembly integration without crushing the porous surface.
This procedure covers handling, installation, and cleaning of the sintered porous titanium foam sheet. All actions assume compatible process media and operating conditions.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic cleaner
- Verify compatibility
Verify the process medium, operating pressure, and temperature are compatible with the sintered titanium structure. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and installation. - Install the sheet
Install the sheet into the assembly using cutting, welding, or basic machining only as required for integration. - Clean after use
Clean the porous sheet by selecting backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium.
What is the relationship between the 20 µm filtration rating and the 20 PPI pore density in this sintered titanium foam sheet, and how does that affect performance?
The 20 µm filtration rating indicates the particle size retention, while the 20 PPI (pores per inch) describes the cellular structure density. The sheet has a cell spacing of approximately 1.27 mm and a porosity of 35–45%, creating interconnected flow paths. The 20 PPI structure provides a balance between flow and filtration precision, with a relative air permeability of 1×10⁻⁴ L/(cm²·min·Pa). Both values should be reviewed together to match the sheet to the intended assembly.
What are the maximum service temperature and media compatibility constraints for this porous titanium sheet?
The recommended service temperature is ≤300°C. The titanium-based structure provides corrosion resistance and thermal stability, but media compatibility must be confirmed before installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications, but specific operating pressure, temperature, and media should be evaluated.
What cleaning and handling procedures are recommended for maintaining the sintered titanium foam sheet?
Protect the porous surface from crushing and contamination during handling. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration.
This single 160 × 160 × 10 mm sintered porous titanium sheet is assessed for 20 µm filtration with a 20 PPI cellular structure, 35–45% interconnected porosity, 1.27 mm cell spacing and 1 × 10⁻⁴ L/(cm²·min·Pa) relative air permeability, providing a corrosion-resistant, heat-tolerant medium for liquid and gas separation trials up to 300°C.
Positive
- 20 µm filtration with 20 PPI structure: The 20 µm filtration rating is combined with a 20 PPI cellular geometry and 35–45% interconnected porosity, preserving open flow paths for solid-liquid, gas-solid and gas-liquid separation applications.
- Corrosion-resistant and thermally stable titanium matrix: Formed from titanium or titanium-alloy powder by high-vacuum sintering, the 2.48–2.93 g/cm³ porous sheet offers low flow resistance, corrosion resistance and tolerance up to the recommended 300°C service limit in compatible media.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process conditions, installation methods or adjacent component heat input must be reviewed before deployment.
- Porous surface requires handling protection: The porous surface must be protected from crushing and contamination during handling and storage, and cleaning via backflushing, steam, ultrasonic or chemical routes must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
