|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet requires protection from crushing and contamination during handling, cleaning, and installation. Media compatibility, operating pressure, temperature, and target flow must be confirmed before service.
- Surface Protection: Protect the porous surface from crushing and contamination at all times.
- Process Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation.
- Configuration Verification: Review PPI and micron filtration rating together when matching the sheet to an assembly.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
Confirm the sheet is appropriate for the intended process conditions before handling. Protect the porous structure from contamination and choose a cleaning method suited to the process medium.
Required Equipment: Backflushing apparatus, Steam cleaner, Ultrasonic bath, Chemical cleaning agent
- Confirm Compatibility
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the Surface
Handle the sheet carefully to protect the porous surface from crushing and contamination. - Select a Cleaning Method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure. - Apply the Cleaning Method
Apply the selected cleaning method while protecting the porous surface from contamination.
How does the 20 µm filtration rating interact with the 30 PPI pore density in terms of flow resistance and separation efficiency?
The 20 µm filtration rating specifies the particle size retention, while the 30 PPI defines the cellular pore density. The interconnected porous structure with 35–45% porosity and approximately 0.85 mm cell spacing ensures low flow resistance, as indicated by a relative air permeability of 1×10⁻⁴ L/(cm²·min·Pa). The combination enables stable separation with controlled filtration, but the PPI and micrometre values should be reviewed together when matching the sheet to an assembly.
What media compatibility and operating temperature limits apply to this sintered titanium foam sheet?
The sheet is made from titanium or titanium alloy, providing corrosion resistance and thermal stability in compatible media. The recommended service temperature is ≤300°C. Media compatibility, operating pressure, and target flow must be independently reviewed before quotation or installation, as the manufacturer does not guarantee performance without specific process validation.
What handling and cleaning procedures are recommended to maintain the integrity of the porous titanium foam sheet?
The porous surface must be protected from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, or compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care is needed to avoid damaging the porous structure.
This 200 × 200 × 5 mm sintered porous titanium foam sheet combines a 20 µm filtration rating with a 30 PPI interconnected pore structure at 35–45% porosity, supporting liquid/gas separation trials in corrosive or elevated-temperature process streams up to 300°C.
Positive
- Precise filtration with open flow paths: The 20 µm filtration rating is paired with a 30 PPI cellular structure and 35–45% porosity, providing interconnected flow paths, low flow resistance, and uniform pore distribution for stable solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant cleanable metallic matrix: The high-vacuum sintered titanium or titanium-alloy framework offers corrosion resistance and thermal stability in compatible media, while its metallic construction allows cutting, welding, and basic machining as well as cleaning by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature filtration or separation applications must be evaluated against this ceiling before installation.
- Porous surface requires careful handling: The open porous surface must be protected from crushing and contamination, and cleaning method selection depends on the process medium and operating procedure, with media compatibility, operating pressure, temperature, target flow, and dimensional tolerance requiring review before deployment.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
