Porous Titanium Foam Sheet 10μm, 60 PPI, 15mm ATOMFAIR®

$168.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered porous titanium foam sheet with 10 μm filtration, 60 PPI, 120 × 120 × 15 mm size, 35–45% porosity and ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 120 × 120 × 15 mm, 60 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 10 µm filtration rating with a 60 PPI cellular structure in a 120 × 120 × 15 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 0.42 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 120 × 120 × 15 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T60-E1510
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	10 µm
Sheet Size	120 × 120 × 15 mm
Thickness	15 mm
Pore Density	60 PPI
Approximate Cell Spacing	0.42 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	5 × 10^-5 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

10 µm filtration precision paired with a 60 PPI porous-cell structure.
120 × 120 × 15 mm sheet supplied as one piece.
Cell spacing is approximately 0.42 mm for the 60 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 10 µm, 60 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 120 × 120 × 15 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

What is the relationship between the 60 PPI pore density and the 10 µm filtration rating in this sintered titanium foam sheet?

The 60 PPI (pores per inch) indicates the cellular structure density with approximately 0.42 mm cell spacing, while the 10 µm filtration rating refers to the particle retention size. These are independent parameters: the PPI governs the structural scaffold and flow characteristics, whereas the filtration rating defines the smallest particle size that can be separated. Both must be matched to the application.

What are the critical compatibility considerations for using this sintered titanium foam sheet in a corrosive fluid environment?

The sheet is made from titanium or titanium alloy, offering inherent corrosion resistance, but compatibility depends on the specific media, temperature, and pressure. The recommended service temperature is ≤300°C. For aggressive chemicals, consult the material grade and ensure the media does not attack titanium. The porous structure with 35–45% porosity and interconnected passages must be evaluated for chemical attack and fouling.

What cleaning methods are recommended for this sintered titanium foam sheet to maintain its filtration performance?

The sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures. The choice depends on the process medium and operating procedure. The porous surface must be protected from crushing and contamination. The metallic construction supports cutting, welding, and basic machining for assembly integration if needed.

Assessment

This sintered porous titanium foam sheet offers 10 µm filtration precision with a 60 PPI interconnected pore structure, suitable for laboratory-scale filtration and separation applications requiring corrosion resistance and thermal stability up to 300°C.

Positive

Fine filtration with low flow resistance: 10 µm filtration rating combined with 60 PPI and 35-45% interconnected porosity provides precise separation while maintaining low pressure drop for liquid and gas streams.
Corrosion-resistant and cleanable metal construction: Titanium-based porous sheet offers thermal stability up to 300°C and chemical resistance; can be cleaned by backflushing, steam, ultrasonic, or chemical methods, enabling reuse in compatible processes.

Trade-offs

Temperature limit of 300°C: Recommended service temperature does not exceed 300°C, restricting use in high-temperature filtration or reactions beyond this threshold.
Requires careful handling and media compatibility check: Porous surface is susceptible to crushing and contamination; media compatibility, operating pressure, temperature, and flow must be verified before installation to avoid performance degradation.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).