|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 100 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Recommended service temperature is ≤300°C, and media compatibility must be verified before installation.
- Mechanical Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Thermal Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility, operating pressure, and temperature before installation to prevent corrosion or failure.
Inspect the sheet for damage before use and select a cleaning method appropriate for the process medium. Protect the porous surface from mechanical stress and contamination throughout service.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed by excessive clamping force. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the chosen method, following manufacturer guidelines to avoid damaging the porous structure. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reinstallation or storage.
How does the 110 PPI pore density relate to the 10 µm filtration rating for this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure density, while the 10 µm filtration rating specifies the particle size retention capability. These are independent parameters: the PPI value influences flow resistance and mechanical strength, whereas the filtration rating defines the smallest particle size retained. For this 100 × 100 × 5 mm sheet, the 110 PPI structure yields an approximate cell spacing of 0.23 mm and a porosity of 35–45%, with the interconnected pore network enabling both 10 µm solid-liquid, gas-solid, and gas-liquid separation.
What are the maximum service temperature and media compatibility constraints for this titanium foam sheet?
The recommended service temperature is ≤300°C, and the titanium or titanium-alloy construction provides corrosion resistance in compatible media, but media compatibility, operating pressure, and temperature must be reviewed before installation. The sheet is suitable for water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, and seawater pretreatment, but process-specific validation is required.
What cleaning and handling procedures are recommended for maintaining the porous titanium sheet's filtration performance?
Protect the porous surface from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, with the choice depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid damaging the interconnected pore structure.
This sintered porous titanium foam sheet provides 10 µm filtration precision within a 110 PPI interconnected pore structure at 35–45% porosity and approximately 0.23 mm cell spacing, packaged as a 100 × 100 × 5 mm sheet for liquid and gas separation trials; operational use is limited to ≤300°C and requires protection of the porous surface from crushing and contamination.
Positive
- 10 µm rating with 110 PPI structure: Offers 10 µm filtration precision in a 110 PPI open-cell titanium framework, supporting solid-liquid, gas-solid, and gas-liquid separation with approximately 0.23 mm cell spacing.
- Corrosion-resistant, cleanable metallic media: High-vacuum sintered titanium provides corrosion resistance and thermal stability, while its 35–45% porosity preserves interconnected flow paths; the sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so the sheet must not be used in higher-temperature filtration or thermal-management duties without additional qualification.
- Porous surface needs crush and contamination protection: Handling instructions require protecting the porous surface from crushing and contamination; media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
