|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 100 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium and operating procedure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Media Compatibility: Media compatibility, operating pressure, and temperature must be reviewed before installation to prevent corrosion or failure.
- Machining Constraint: The metallic structure supports cutting, welding, and basic machining but requires care to avoid pore collapse.
Protect the porous surface from physical damage and contamination during handling and installation. Select a cleaning method appropriate for the process medium to maintain filtration performance.
Required Equipment: Backflushing system, Ultrasonic bath, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed by excessive clamping force. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the chosen method, following manufacturer guidelines for duration and intensity. - Rinse and dry
Rinse the sheet with compatible solvent or deionized water and allow it to dry completely before reuse.
How does the 10 µm filtration rating relate to the 30 PPI cellular structure in this sintered titanium foam sheet?
The 10 µm filtration rating specifies the particle size retained, while the 30 PPI (pores per inch) describes the cellular structure's density. These are independent parameters: the 30 PPI structure yields an approximate 0.85 mm cell spacing and 35–45% porosity, supporting the 10 µm filtration precision through interconnected open pathways. Always review both values together when matching the sheet to an assembly to ensure filtration efficiency and flow requirements are met.
What are the temperature and pressure limitations for using this porous titanium foam sheet in filtration applications?
The recommended service temperature is ≤300°C, as stated in the technical specifications. Operating pressure is not explicitly defined in the product description; it must be reviewed together with media compatibility, target flow, and dimensional tolerance before quotation or installation. The sheet's metallic construction provides corrosion resistance and thermal stability, but pressure limits depend on the specific assembly and process conditions.
What cleaning methods are compatible with this sintered titanium foam sheet to maintain its filtration performance?
Compatible cleaning methods include backflushing, steam, ultrasonic, and chemical cleaning, chosen according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling. The metallic structure supports cleanability and reuse, but verify compatibility with the specific cleaning chemical and temperature to avoid damage.
A 10 µm filtration rating, 30 PPI sintered titanium foam sheet (100×100×5 mm) with 35–45% porosity and 0.85 mm cell spacing, offering corrosion resistance, thermal stability up to 300°C, and cleanability for solid-liquid, gas-solid, and gas-liquid separation in laboratory and industrial filtration applications.
Positive
- Corrosion and thermal stability: Titanium-based construction provides corrosion resistance and heat tolerance up to 300°C, enabling use in chemically aggressive or high-temperature process streams.
- Reusable and cleanable porous structure: The metallic foam supports backflushing, steam, ultrasonic, and chemical cleaning procedures, allowing repeated use without replacement in compatible media.
Trade-offs
- Temperature limit of 300°C: Recommended service temperature is ≤300°C, which restricts deployment in high-temperature pyrolysis, combustion, or sintering processes that exceed this threshold.
- Porous surface vulnerability: The open-cell structure is susceptible to crushing from mechanical impact and contamination from particulates, requiring careful handling and protective storage.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
