|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 200 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires careful handling to prevent pore crushing and contamination. Operating temperature must not exceed 300°C, and media compatibility must be verified before use.
- Media Compatibility Verification: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and assembly.
- Cleaning Methods: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Machining Constraints: Cutting, welding, and basic machining are permitted but must avoid damaging the porous structure.
How does the 110 PPI pore density relate to the 10 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure of the sheet, while the 10 µm value specifies the filtration precision. These two parameters are independent but complementary: PPI defines the macroscopic pore density and spacing (approximately 0.23 mm cell spacing), whereas the filtration rating indicates the size of particles retained. The 35–45% porosity and interconnected through-pore structure support flow while achieving the 10 µm filtration target. Always review both values together when matching the sheet to an assembly.
What are the maximum service temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility must be evaluated individually because the sheet is made from titanium and titanium alloy, which provides corrosion resistance in compatible media. The manufacturer explicitly states that operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. For process-specific compatibility, contact technical sales.
What cleaning and handling precautions are required for the sintered titanium foam sheet to avoid damage?
The porous surface must be protected from crushing and contamination. Recommended cleaning methods include backflushing, steam, ultrasonic, or compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid clogging or deforming the porous structure.
This 100 × 200 × 3 mm sintered titanium foam sheet combines a 10 µm filtration rating with a 110 PPI interconnected pore structure (35–45% porosity) for solid-liquid, gas-solid, and gas-liquid separation. Its titanium framework provides corrosion resistance and cleanability, but service temperature is limited to ≤300°C and the porous surface requires protection from crushing and contamination.
Positive
- Interconnected 10 µm porous structure: The 110 PPI cellular structure with approximately 0.23 mm cell spacing and 35–45% porosity creates interconnected through-pore pathways, supporting stable separation and controlled filtration in solid-liquid, gas-solid, and gas-liquid applications.
- Cleanable corrosion-resistant titanium matrix: The sintered titanium framework provides corrosion resistance, heat tolerance, and reuse through backflushing, steam, ultrasonic, or compatible chemical cleaning, while metallic construction allows cutting, welding, and basic machining for assembly integration.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C; applications approaching or exceeding this limit require explicit compatibility review before installation.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and cleaning methods should be selected according to the process medium and operating procedure to avoid structural or performance damage.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
