|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 200 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface is susceptible to crushing and contamination, requiring protection during handling and storage. Recommended service temperature must not exceed 300°C to maintain structural integrity.
- Surface Protection: Protect the porous surface from crushing and contamination to preserve filtration performance.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid thermal degradation.
- Media Compatibility: Verify media compatibility with the titanium or titanium-alloy structure before installation.
This procedure outlines safe handling and cleaning steps for a 10 µm filtration rating titanium foam sheet. Proper care prevents surface damage and maintains filtration efficiency.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before handling. - Protect the porous surface
Protect the porous surface from crushing by placing the sheet on a clean, soft surface. - Select a cleaning method
Select a cleaning method such as backflushing, steam, ultrasonic, or chemical cleaning based on the process medium. - Apply the cleaning procedure
Apply the chosen cleaning procedure according to the operating protocol to remove contaminants. - Rinse and dry the sheet
Rinse the sheet with compatible solvent and allow it to dry completely before reuse.
How does the 10 µm filtration rating relate to the 20 PPI pore density on this sintered titanium foam sheet?
The PPI value describes the cellular structure (pores per inch), while the micrometre value describes the filtration precision. Both must be reviewed together when matching the sheet to an assembly. For this sheet, the 20 PPI structure yields approximately 1.27 mm cell spacing and 35–45% porosity, while the 10 µm rating defines the particle retention size.
What are the maximum operating temperature and pressure limits for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Operating pressure is not explicitly stated in the product specifications; it must be reviewed in context of the specific application, media compatibility, and dimensional tolerance before installation. The sheet's metallic porous structure supports corrosion resistance and thermal stability in compatible conditions.
How should this porous titanium sheet be cleaned and handled to maintain its filtration performance?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction allows cutting, welding, and basic machining for assembly integration.
This 100 × 200 × 3 mm sintered porous titanium foam sheet pairs a 10 µm filtration rating with a 20 PPI cellular structure and 35–45% through-pore porosity, making it suitable for laboratory-scale solid-liquid, gas-solid, and gas-liquid separation trials. Its utility depends on verifying media compatibility, operating pressure, and the ≤300°C service limit before installation.
Positive
- Interconnected porosity enables controlled 10 µm filtration: The 35–45% porosity with approximately 1.27 mm cell spacing provides interconnected through-pore flow paths and uniform pore distribution, supporting stable separation at the 10 µm rating.
- Machinable metallic structure with multiple cleaning options: The sintered titanium or titanium-alloy construction permits cutting, welding, and basic machining for assembly integration, while backflushing, steam, ultrasonic, or compatible chemical cleaning supports reuse in suitable media.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so hotter gas, steam, or thermal-management applications require explicit suitability confirmation before installation.
- Media compatibility and process parameters require verification: Media compatibility, operating pressure, target flow, temperature, and dimensional tolerance must be reviewed before quotation or installation because the porous structure's performance depends strongly on the specific process environment.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
