|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 2.8 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires careful handling to avoid mechanical damage to its porous structure. Its service temperature must not exceed 300°C, and media compatibility must be verified before use.
- Temperature Limit: Do not exceed 300°C service temperature to prevent structural degradation.
- Media Compatibility: Verify compatibility of the process fluid with titanium and titanium alloy to avoid corrosion or contamination.
- Mechanical Protection: Protect the porous surface from crushing, denting, or contamination during handling and installation.
- Cleaning Procedure: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
- Integration Machining: Cutting, welding, and basic machining are possible but must be performed with care to avoid damaging the porous structure.
How does the 20 PPI pore density relate to the 10 µm filtration rating in this sintered titanium foam sheet?
The 20 PPI describes the cellular structure's pore density, while the 10 µm value specifies the filtration precision. They are independent parameters that must be reviewed together for assembly matching. The sheet has a 35–45% porosity with interconnected flow paths, and the 20 PPI structure yields approximately 1.27 mm cell spacing, enabling both mechanical retention at 10 µm and low flow resistance.
What are the recommended cleaning methods for this sintered porous titanium sheet to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures. The titanium-based porous structure is corrosion-resistant and thermally stable up to 300°C, allowing these methods without damaging the interconnected pore network. The appropriate method depends on the process medium and operating procedure.
Can this 200 × 200 × 2.8 mm titanium foam sheet be machined or welded for integration into custom assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The sheet is supplied as a single piece with dimensions 200 × 200 × 2.8 mm, and its porous structure remains intact during standard fabrication processes. Custom dimensions are also available upon consultation.
This 200 × 200 × 2.8 mm sintered titanium foam sheet delivers a 10 µm filtration rating in a 20 PPI interconnected porous network with 35–45% porosity and about 1.27 mm cell spacing, enabling corrosion-resistant liquid and gas separation with cleanable reuse up to a 300 °C service ceiling.
Positive
- 10 µm filtration via interconnected porous network: Combines a 10 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, providing low flow resistance for solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant, cleanable titanium construction: Titanium-based structure offers corrosion resistance and thermal stability in compatible media, can be backflushed, steam-cleaned, ultrasonicated, or chemically cleaned, and supports cutting, welding, and basic machining for assembly integration.
Trade-offs
- 300 °C service temperature ceiling: Recommended service temperature is limited to ≤300°C; higher-temperature service or aggressive process media require explicit compatibility verification before installation.
- Porous surface needs handling protection: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
