|
1435L-4 Ultra-Low-Humidity (1%-10% RH) Stainless Steel Damp-Proof Cabinet
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
For bulk orders, configuration review, accessory matching or application-specific guidance, contact our engineering sales team.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This cabinet requires stable power and level installation to maintain the low-humidity environment. Stored items must be distributed evenly and the door kept closed to prevent moisture ingress.
- Installation Surface: Install the cabinet on a stable indoor surface to ensure level operation and door seal integrity.
- Power Requirement: Confirm stable power conditions before formal use to prevent control system malfunction.
- Loading Distribution: Distribute stored items evenly across the adjustable shelves to avoid exceeding structural limits.
- Door Sealing: Keep the door closed during normal use to maintain the low-humidity environment.
- Movement Protection: Protect structural and sealing components during movement to prevent damage.
Follow these steps to install and prepare the cabinet for use. Proper setup ensures reliable humidity control and safe operation.
Required Equipment:
- Inspect Cabinet
Inspect the cabinet after delivery for any damage or misalignment. - Install on Level Surface
Install the cabinet on a stable indoor surface and verify level installation. - Verify Door Sealing
Confirm that the door seals properly and close the door tightly. - Connect Power
Connect the cabinet to a stable power source and confirm the power indicator is on.
What humidity performance can the Atomfair 1435L stainless steel damp-proof cabinet maintain, and what dehumidification technology is used?
The cabinet provides an ultra-low-humidity control range of 1%-10% RH. It is equipped with a high-efficiency electronic dehumidification device for rapid cabinet humidity reduction and uses microcomputer intelligent control with power-off memory and fully automatic running logic. The 1435L body is a SUS304 stainless steel two-door cabinet with 5 adjustable shelves.
Can the 1435L ultra-low-humidity cabinet be configured for clean-room monitoring or connection to a PC-side environmental system?
Yes; optional accessories include an RS485 communication interface for PC-side monitoring and recorded cabinet-status management, as well as an over-humidity alarm device that triggers when measured humidity exceeds the configured set value. A gas-filling device is also available for faster dehumidification or clean-gas purging support. These options are inquiry-based rather than included as standard, so the correct configuration should be confirmed before ordering.
What installation and handling requirements apply to the 1435L stainless steel damp-proof cabinet?
Install the cabinet on a stable indoor surface, keep the door closed during normal use, and distribute stored items evenly across the 5 adjustable shelf levels. Protect structural and sealing components during movement and use reinforced wooden-crate packaging when shipment protection is required. Confirm stable power conditions before use, verify level installation and door sealing after delivery, and do not exceed the stated shelf-loading or application conditions.
The 1435L SUS304 stainless steel damp-proof cabinet provides ultra-low humidity storage (1-10% RH) using a high-efficiency electronic dehumidification device with microcomputer control. Suitable for clean-room environments, optics, and moisture-sensitive materials, but requires stable installation and careful door sealing; over-humidity alarm is an optional add-on.
Positive
- SUS304 stainless steel construction: Corrosion-resistant and clean-room-compatible cabinet body with tempered-glass doors, suitable for hygiene-sensitive and corrosion-conscious storage environments.
- High-efficiency electronic dehumidification: Rapid cabinet humidity reduction to 1-10% RH with microcomputer intelligent control and power-off memory, enabling consistent ultra-low humidity conditions.
Trade-offs
- Installation and leveling required: The cabinet must be placed on a stable indoor surface and leveled; door sealing must be verified after delivery to ensure proper humidity control.
- Over-humidity alarm is optional: The over-humidity alarm feature, which triggers when humidity exceeds the set value, is not included by default and must be ordered separately as an accessory.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
