Moistureproof Nitrogen Cabinet 450L AF-MNIC450F ATOMFAIR®

450L Moistureproof Nitrogen Integrated Cabinet, Anti-Static Cabinet Body

Research-grade laboratory product

Product Overview

The 450 L configuration uses a anti-static cabinet body, a humidity control range of 1%-60% RH, outer dimensions of 900 × 600 × 1010 mm, inner dimensions of 855 × 570 × 840 mm and 3 adjustable shelves.

This moistureproof nitrogen integrated cabinet combines electronic dehumidification with nitrogen control in one storage platform for efficient low-humidity recovery. It helps reduce moisture absorption, oxidation, optical haze, solderability loss and storage instability while lowering gas demand compared with ordinary nitrogen-only cabinet operation.

Typical application areas include research laboratories, electronics workshops, optical storage rooms, incoming-material control areas, powder and film storage spaces and quality-control environments that require low-humidity cabinet protection with efficient nitrogen management. This body type is suitable for electrostatic-control areas and ESD-sensitive material handling.

The cabinet combines 1.2 mm galvanized steel cabinet with anti-static exterior coating, tempered-glass viewing doors and magnetic sealing, an electronic dehumidification core with regenerative absorbent polymer, a precision nitrogen-control device, fully automatic switching between system modes and display-based cabinet management for dependable daily operation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-MNIC450F
Product Family	Moistureproof Nitrogen Integrated Cabinet
Cabinet Body	Anti-static cabinet body
Nominal Capacity	450 L
Humidity Control Range	1%-60% RH
Outer Dimensions (W × D × H)	900 × 600 × 1010 mm
Inner Dimensions (W × D × H)	855 × 570 × 840 mm
Adjustable Shelf Quantity	3
Cabinet Material	1.2 mm galvanized steel cabinet with anti-static exterior coating and 5 mm tempered-glass viewing doors
Control Mode	Fully automatic switching between dehumidification and nitrogen-control modes
Dehumidification System	Electronic dehumidification core with regenerative absorbent polymer
Dehumidification Module Housing	ABS plus flame-retardant housing
Nitrogen Control System	Precision nitrogen-control device for rapid cabinet humidity reduction
Integrated Efficiency	Designed to reduce nitrogen usage by more than 50% compared with ordinary nitrogen cabinets
Suitable Stored Materials	Moisture-sensitive electronic parts, optical components, powders, films and laboratory materials

Key Features and Advantages

Integrated dual-system architecture combining an electronic dehumidification core with a precision nitrogen-control device.
High-performance absorbent polymer and regenerative dehumidification design for repeat-use moisture control.
ABS plus flame-retardant housing on the dehumidification module for durable routine cabinet operation.
Fully automatic switching logic between dehumidification and nitrogen-control modes according to cabinet humidity conditions.
Integrated cabinet design intended to reduce nitrogen usage by more than 50% compared with ordinary nitrogen cabinets.

Optional Items and Consultation

Internal high-brightness LED lighting for improved visibility in cabinet interiors.
Stainless steel cabinet-body upgrade for cleaner or more corrosion-conscious storage environments.
Nitrogen generator configuration for applications that prefer an on-site nitrogen supply.
RS485 communication interface for PC-side monitoring and recorded cabinet-status management.
Over-humidity alarm device that triggers when measured humidity exceeds the configured set value.
If optional items are required, please contact inquiry@atomfair.com.

APPLICATION SCOPE: Suitable for research laboratories, electronics workshops, incoming-material control areas, powder and film storage rooms and quality-control environments that require low-humidity cabinet protection with efficient nitrogen management.

HANDLING & STORAGE: Install the cabinet on a stable indoor surface, keep the door closed during normal use, distribute stored items evenly across the 3 shelf levels, protect structural and sealing components during movement, and use reinforced wooden-crate packaging when shipment protection is required. Verify stable gas-supply conditions before operation.

IMPORTANT NOTICE: Confirm the correct model, cabinet body type, capacity and optional accessories before ordering. Inspect the cabinet after delivery, verify level installation and door sealing, and do not exceed the stated shelf-loading or application conditions. Confirm utility conditions such as power and gas connections before formal use.

TAILORED SOLUTIONS FOR RESEARCH

For bulk orders, configuration review, accessory matching or application-specific guidance, contact our engineering sales team.

EMAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This cabinet requires stable electrical and gas supply connections and must be operated on a level surface with sealed doors. The anti-static coating and electronic dehumidification core demand careful handling to avoid damage and maintain ESD protection.

Electrical Safety: Ensure the cabinet is connected to a grounded power outlet and avoid overloading the circuit.
Gas Supply: Verify stable nitrogen gas supply conditions before operation to prevent pressure fluctuations.
Environmental Constraints: Operate the cabinet in a controlled indoor environment with stable temperature and humidity to optimize dehumidification efficiency.
Mechanical Integrity: Protect structural and sealing components during movement and use reinforced wooden-crate packaging for shipment.
Loading Limits: Do not exceed the stated shelf-loading conditions and distribute stored items evenly across the shelves.

HowTo

This procedure guides the user through the initial installation, gas and power connection, and verification of cabinet sealing. Proper setup ensures reliable low-humidity storage and efficient nitrogen usage.

Confirm Configuration
Confirm the correct model, cabinet body type, capacity, and optional accessories before ordering and delivery.
Inspect Delivery
Inspect the cabinet after delivery for any shipping damage and verify the integrity of the door seal.
Position and Level
Place the cabinet on a stable, level indoor surface and adjust the leveling feet to ensure proper door alignment.
Connect Utilities
Connect the cabinet to a grounded power outlet and attach the nitrogen gas supply line to the precision control device.
Stabilize Humidity
Turn on the cabinet and allow the dehumidification system to stabilize with the humidity control set between 1% and 60% RH.
Load Materials
Distribute stored items evenly across the three adjustable shelves without exceeding the maximum load per shelf.
Maintain Closure
Keep the door closed during normal operation and monitor the display for any over-humidity alarms.

FAQ

How does the dual dehumidification and nitrogen control system in the AF-MNIC450F reduce nitrogen consumption compared with standard nitrogen cabinets?

The integrated electronic dehumidification core with regenerative absorbent polymer handles initial moisture removal, so nitrogen is used only for final precision control and rapid recovery. Atomfair specifies that this dual-system design reduces nitrogen usage by more than 50% compared with ordinary nitrogen-only cabinets.

Is the anti-static cabinet body of the 450L model suitable for storing ESD-sensitive optical components and powders in a research laboratory?

Yes, the anti-static cabinet body with 1.2 mm galvanized steel and anti-static exterior coating is explicitly designed for electrostatic-control areas and ESD-sensitive material handling. The product listing confirms suitability for storing moisture-sensitive electronic parts, optical components, powders, and films.

What installation and utility conditions must be met for the 450L moistureproof nitrogen integrated cabinet to operate reliably?

The cabinet must be placed on a stable indoor surface, the door kept closed during use, and stored items evenly distributed across the three adjustable shelves. Before operation, verify stable gas-supply conditions and power connections; for shipment, use reinforced wooden-crate packaging.

Assessment

The 450L moistureproof nitrogen integrated cabinet with anti-static body combines electronic dehumidification and precision nitrogen control to reduce nitrogen consumption by over 50% while maintaining 1%-60% RH, suitable for ESD-sensitive materials but requires stable gas supply and careful handling due to its steel construction.

Positive

Integrated dual-system efficiency: Combines electronic dehumidification with nitrogen control, reducing nitrogen usage by more than 50% compared with ordinary nitrogen cabinets, lowering operational gas demand.
Anti-static cabinet body: Features 1.2 mm galvanized steel with anti-static exterior coating, suitable for electrostatic-control areas and ESD-sensitive material handling.

Trade-offs

Requires stable utility conditions: Operation depends on stable gas-supply and power connections; must be verified before use, adding infrastructure prerequisites.
Heavy steel cabinet handling: Constructed from 1.2 mm galvanized steel; requires stable indoor surface installation and reinforced packing for movement, increasing handling complexity.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).