ATOMFAIR PPF-367 PROTECTIVE MANUAL POWDER PELLET PRESS (0-30 TON)SAFETY-ENHANCED LAB COMPACTION COMPONENT
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or customized equipment quotations.
EMAIL: INQUIRY@ATOMFAIR.COM
|
|||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR
|
The PPF-367 press must be placed on a table rated for at least 65 kg and must never be operated beyond 30 tons. The integrated safety shield must be secured before any load application to contain ejected fragments.
- Table weight capacity: The supporting table must be rated to safely support the 65 kg press weight.
- Pressure limit: The hydraulic system must not be actuated beyond 30 tons to prevent mechanical failure.
- Shield requirement: The safety shield must be in the closed and locked position before applying pressure.
- Fragment containment: Brittle sample shards may be ejected during compaction; the shield provides the necessary containment.
Begin by verifying the table capacity and securing the safety shield. Then apply gradual hydraulic pressure, staying within the 30-ton limit, and release pressure before opening the shield.
Required Equipment: Manual pumping bar
- Verify table capacity
Verify that the laboratory table can support the 65 kg press weight. - Secure safety shield
Secure the integrated safety shield in the closed position. - Apply pressure within limit
Pump the handle gradually, ensuring the pressure does not exceed 30 tons.
Does the 30-ton maximum force of the PPF-367 press limit the achievable sample thickness or diameter for FTIR pellet preparation?
The press delivers 0–30 tons of force through a 110 mm diameter piston with a 30 mm vertical stroke. The internal column clearance of 112 mm × 160 mm accepts standard powder dies, but the 30 mm displacement constrains the maximum pellet thickness. The source does not specify exact thickness limits; however, the force is sufficient for routine analytical chemistry specimens. For precise die dimensions, contact engineering.
Can the PPF-367 manual press be used with standard 13 mm or 7 mm FTIR pellet dies, and does it require any additional vacuum or heating accessories?
The press is designed for FTIR sample fabrication and features a 110 mm piston with 30 mm stroke to adapt within various common standard powder dies. The source does not list specific die sizes, such as 13 mm or 7 mm, nor does it mention built-in vacuum or heating capabilities. The press is manual and requires no electrical grid connection. For die compatibility or accessory integration, contact Atomfair engineering.
What are the key safety procedures and infrastructure requirements for operating the PPF-367 30-ton manual pellet press in a laboratory?
The press includes an integrated safety shielding barrier to contain potential sample fragments during maximum load cycles. The net mass of 65 kg requires a laboratory table that can safely sustain that weight. Never actuate the pump past the 30-ton rated maximum to maintain internal line and valve tolerances. Ensure the protection mechanism is securely positioned before applying full pressure. The press is completely manual, requiring no electrical connections.
The PPF-367 manual powder pellet press (0-30 ton) integrates a multi-layer safety shield and rigid four-pillar frame to deliver uniform compaction and operator protection for FTIR sample preparation, though its 65 kg mass requires a rated benchtop and strict adherence to the 30-ton maximum pressure to avoid system damage.
Positive
- Integrated safety shielding barrier: Physical containment blocks potential sample fragments or brittle shards during maximum load processing, enhancing operator safety in high-frequency workflows.
- Rigid four-pillar architecture frame: Eliminates minor axis distortion under deep loading intervals, yielding parallel compaction faces and mitigating disk cracking for more consistent sample quality.
Trade-offs
- Heavy benchtop mass (65 kg): The 65 kg weight requires verification that the target laboratory table can safely sustain the hardware, limiting portability and benchtop options.
- Rated pressure ceiling of 30 tons: The pump must never be actuated past the 30-ton maximum to maintain interior line and valve tolerances, constraining applications requiring higher compaction forces.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
