ATOMFAIR® SMP‑58 ELECTRODE SAMPLER PUNCH (Φ50 MM)RESEARCH GRADE MATERIAL
|
|||||||||||||||||||||||||
|
|||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
If you’re interested, have any questions, or have specific customization requirements, please feel free to contact us.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The SMP-58 punch is limited to 0.05–0.5 mm continuous sheet materials comprising metallic foils, polymer separators, or coated electrodes. Cutting hardened metal tabs or exceeding the 0.5 mm thickness threshold will damage the internal die clearance and degrade edge quality.
- Thickness Limit: Do not use the punch on materials thicker than 0.5 mm to protect the internal blade alignment.
- Material Compatibility: The tool is intended only for metallic foils (Cu, Al), polymer battery separator films, and coated electrode substrates.
- Cleaning Requirement: Clean the lower tray promptly after each use with cleanroom gas purge or anhydrous ethanol to prevent edge degradation from accumulated particulate.
Place the continuous sheet material on the base and press the punch actuator to produce a clean Φ50 mm circular specimen. After cutting, remove the sample and clean the lower tray to maintain cutting precision.
Required Equipment: SMP-58 Electrode Sampler Punch
- Position the sheet material
Align the continuous sheet material flat against the base so the desired sampling area is centered under the Φ50 mm blade matrix. - Apply pressing force
Press the punch firmly and uniformly to activate the micro-clearance blades and separate the specimen from the sheet. - Remove the cut specimen
Lift the punch and retrieve the clean circular specimen using tweezers or gloved hands to avoid contamination. - Clean the lower tray
Purge the lower tray with cleanroom gas or wipe with anhydrous ethanol to remove particulate residues before the next cut.
What thickness range does the SMP-58 electrode sampler punch accommodate and how does it maintain edge quality at the upper 0.5 mm limit?
The Atomfair SMP-58 punch is specified for continuous sheet materials from 0.05 mm to 0.5 mm. At the maximum thickness, it relies on advanced micro-clearance matching blades and a highly rigid alignment axis to deliver high cutting precision without wrinkling or macro-deformation, yielding clean specimen edges free of micro-burrs. However, the manufacturer explicitly warns not to exceed 0.5 mm to protect internal die clearance boundaries and to avoid cutting hardened metal tabs.
Can the SMP-58 be integrated into a glovebox for handling air-sensitive electrode materials?
Yes, the compact ergonomics-driven layout (Φ100 mm base × L175 mm length, 1.0 kg) enables flexible handheld or tabletop operation inside interior glovebox workspaces. Its stainless steel and anodized aluminum construction provides mechanical rigidity without outgassing concerns, and the lightweight design allows seamless transit between roll-to-roll slitting and analytical benches. Cleanroom gas purges or anhydrous ethanol are recommended for cleaning substrate particulates from the lower tray.
What maintenance procedures and operational limits are required to preserve cutting performance on the SMP-58?
To protect the hardened micro-honed blade matrices and die clearance, never exceed the 0.5 mm material thickness threshold or attempt to cut hardened metal tabs. After each use, promptly clean accumulated substrate particulates from the lower tray using cleanroom gas purges or anhydrous ethanol to prevent edge degradation. The punch ships in a custom impact-absorbing toolkit case and is designed exclusively for professional laboratory research facilities.
The Atomfair SMP-58 electrode sampler punch delivers precise Φ50 mm cutouts from thin sheet materials up to 0.5 mm thickness, with a lightweight handheld design suitable for glovebox use, but requires careful thickness compliance and regular cleaning to maintain cutting edge integrity.
Positive
- Compact ergonomic glovebox-compatible design: The 1.0 kg cylindrical form factor enables flexible handheld operation inside standard lab benches or interior glovebox workspaces, improving process mobility between roll-to-roll slitting and analytical benches.
- High-precision burr-free cutting edges: Hardened micro-honed internal blade matrices execute high-fidelity shear control, producing clean specimen edges free of micro-burrs, tear lines, or layer marks for reliable downstream electrochemical and volumetric evaluation.
Trade-offs
- Strict thickness limit of 0.5 mm: The punch is designed only for materials up to 0.5 mm; exceeding this threshold or attempting to cut hardened metal tabs risks damaging the internal die clearance boundaries and compromising cutting precision.
- Required routine cleaning of lower tray: Substrate particulate accumulations must be promptly removed from the lower tray using cleanroom gas purges or anhydrous ethanol to prevent edge degradation and maintain long-term cutting performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
