|
Yttrium (Y) Evaporation Material, Pieces, 99.99%, 1-10 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This evaporation material requires deposition-source compatibility verification before use. The material's melting point, density, and Z-ratio must be matched to the evaporation method and hardware.
- Deposition Source Compatibility: Confirm that the evaporation source (Ta/W boat, Ta liner, or water-cooled e-beam hearth with liner) is compatible with yttrium pieces.
- Evaporation Method Selection: Select e-beam or thermal/resistive evaporation by RFQ based on the material's melting point and film requirements.
- Material Parameter Verification: Verify the melting point (1,522°C), density (4.47 g/cm³), and Z-ratio (0.835) for process matching.
- Procurement Verification: Confirm model, purity, form, size range, and pack size before quotation to ensure correct supply.
- Documentation Review: Review certificate, safety data sheet, shipment conditions, and export requirements against laboratory use needs.
What is the melting point and density of Yttrium evaporation material, and how do these properties affect deposition?
The melting point is 1,522 and density is 4.47 (units as stated in the product specification). These properties influence the evaporation rate and power requirements during E-beam or thermal/resistive evaporation. The Z-ratio of 0.835 also requires calibration in the thickness monitor for accurate film deposition control.
What deposition source liners and boats are recommended for Yttrium evaporation material?
The product is compatible with Ta/W boat, Ta liner, or a water-cooled e-beam hearth with liner. The evaporation method can be E-beam or thermal/resistive evaporation by RFQ. Buyers must confirm deposition source geometry before quotation to ensure compatibility with the material's melting point and behavior.
What information must be provided when requesting a quotation for Yttrium evaporation material?
The inquiry should include the required model (AF-YPCS-4N110MM), purity (99.99%), form (Pieces), size range (1-10 mm), and quantity. Available pack sizes are 25g, 100g, 500g, and 1kg with indicative pricing tiers. Buyers should also confirm deposition source geometry, certificate requirements, and shipment conditions before quotation.
This yttrium evaporation material provides 99.99% purity in pieces form (1–10 mm), suitable for e-beam or thermal evaporation using Ta/W boats, Ta liners, or water-cooled e-beam hearths. The melting point of 1,522°C and density of 4.47 g/cm³ require careful matching of deposition source hardware and process parameters; buyers must confirm source geometry, quantity, and certification before ordering.
Positive
- High Purity for Controlled Deposition: 99.99% purity specification minimizes contamination in thin-film deposition, supporting consistent film properties for research-grade applications.
- Versatile Physical Form and Sizing: Pieces 1–10 mm enable flexible loading into multiple evaporation sources (e-beam or thermal) and allow scaling via pack sizes from 25 g to 1 kg.
Trade-offs
- Source Compatibility Must Be Verified: Deposition hardware (boat, liner, or e-beam hearth) must be matched to the material's melting point, density, and form; buyer must confirm compatibility before ordering.
- Pre-Order Qualification Required: Quantity, certificate requirements, and shipment conditions must be clarified with the supplier prior to quotation, adding a step to procurement workflow.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
