ATOMFAIR VGM863 SEMI-AUTOMATIC CYLINDRICAL BATTERY VERTICAL GROOVING MACHINERESEARCH GRADE EQUIPMENT
|
|||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The VGM863 requires a compressed air supply of 0.5–0.7 MPa and AC220V/50Hz power for operation. The hob must be inspected and replaced regularly to maintain ±0.1 mm grooving accuracy and ensure safe operation.
- Compressed Air Supply Requirement: The machine requires a compressed air supply of 0.5–0.7 MPa for automatic grooving operation.
- Hob Maintenance and Replacement: Regular hob inspection and replacement are required to maintain ±0.1 mm processing accuracy and prevent quality degradation.
- Hob Compatibility Verification: Verify hob thickness compatibility with target battery specifications before ordering to ensure correct grooving width.
This procedure covers the initial setup, manual clamping, and automatic grooving operation of the VGM863. Follow these steps to ensure safe and accurate battery case grooving.
Required Equipment: VGM863 grooving machine, Compressed air supply (0.5–0.7 MPa), Appropriate hob for target battery specification
- Connect utilities
Connect the machine to AC220V/50Hz power and a compressed air supply regulated to 0.5–0.7 MPa. - Install and verify hob
Install the hob matching the required grooving width and verify its thickness is compatible with the target battery case. - Adjust grooving parameters
Set the grooving depth (1.2–2.0 mm) and width (1.1–1.5 mm) according to the battery specification using the adjustable controls. - Clamp the battery case
Manually insert the battery case into the clamping mechanism and secure it firmly in place. - Initiate automatic grooving
Activate the automatic grooving cycle and allow the machine to complete the sealing groove processing. - Unclamp and inspect the grooved case
After the cycle completes, unclamp the battery case and inspect the groove dimensions for accuracy (±0.1 mm).
What is the maximum production capacity of the ATOMFAIR VGM863 cylindrical battery grooving machine and how does it maintain accuracy?
The VGM863 achieves a semi-automatic production capacity of 400 pieces per hour while maintaining a processing accuracy of ±0.1 mm. This is supported by a hob service life exceeding 1,000,000 cycles, ensuring consistent groove quality over extended production runs.
What are the adjustable grooving parameters and how do they affect compatibility with different battery sizes?
The grooving depth is adjustable from 1.2 to 2.0 mm, and the grooving width ranges from 1.1 to 1.5 mm, determined by the hob thickness. This adjustability allows the machine to accommodate multiple cylindrical battery specifications, but the hob thickness must be verified against the target battery case to ensure the correct groove width.
What are the utility and infrastructure requirements for installing the VGM863?
The VGM863 requires an AC 220V/50Hz power supply with 140W power consumption and a compressed air supply of 0.5–0.7 MPa. The machine has a compact footprint of 490 × 230 × 560 mm and weighs 40 kg, making it suitable for laboratory or pilot line integration, but the compressed air supply is essential for operation.
The VGM863 semi-automatic grooving machine delivers ±0.1 mm precision with a 400 pcs/h throughput, supported by an adjustable grooving depth of 1.2–2.0 mm and width of 1.1–1.5 mm, making it suitable for cylindrical battery case sealing in research and pilot production. Its compact 490 × 230 × 560 mm footprint and 40 kg weight facilitate bench-top integration, while the >1,000,000-cycle hob life reduces consumable replacement frequency.
Positive
- High precision and throughput: The machine achieves ±0.1 mm processing accuracy with a semi-automatic production rate of 400 pieces per hour, enabling consistent sealing groove quality in cylindrical battery cases for research and pilot-scale operations.
- Adjustable grooving parameters: Grooving depth (1.2–2.0 mm) and width (1.1–1.5 mm, depending on hob thickness) are independently adjustable, allowing the system to accommodate multiple cylindrical battery specifications without tooling changes.
- Extended hob service life: The hob is rated for over 1,000,000 cycles, reducing consumable replacement frequency and operational downtime, which is critical for continuous production environments.
Trade-offs
- Requires compressed air supply: Operation depends on a compressed air supply of 0.5–0.7 MPa, which may require additional infrastructure in laboratories or production facilities lacking pre-installed air lines.
- Manual clamping limits automation: The semi-automatic design requires manual battery clamping, which introduces operator dependency and may reduce throughput consistency in high-volume production settings compared to fully automated systems.
- Hob thickness determines groove width: The grooving width is fixed by the hob thickness, so users must verify hob compatibility with target battery specifications before ordering; changing width requires a hob change, adding operational planning.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
