|
Titanium (Ti) Evaporation Material, Wire, 99.9%, Dia. 1.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Evaporation of this titanium wire requires specific source hardware and process conditions. Deposition source geometry, method, and parameters must be matched to the material's melting point and Z-ratio.
- Evaporation Method: E-beam evaporation is preferred; thermal evaporation is only suitable for thin charges or qualified setups.
- Evaporation Source: Use a water-cooled e-beam hearth or tungsten/tantalum support by RFQ for safe and effective deposition.
- Thermal Properties: The melting point of 1660°C and Z-ratio of 0.628 must be considered for process control and thickness monitoring.
- Source Geometry Compatibility: Confirm that the deposition source geometry accommodates the wire diameter of 1.0 mm and the required charge size.
- Process Matching: Match the evaporation hardware and process route to the material's behavior, melting point, and film requirements.
Why is e-beam evaporation preferred over thermal evaporation for this 1.0 mm diameter Titanium wire?
E-beam evaporation is preferred because Titanium has a high melting point of 1,660°C, which makes thermal evaporation challenging without specialized equipment. The product description specifies that thermal evaporation is only suitable for thin charge or qualified setups, whereas e-beam evaporation can directly handle the material using a water-cooled hearth.
What type of evaporation source is compatible with this Titanium wire material?
This Titanium wire is compatible with a water-cooled e-beam hearth or a tungsten/tantalum (W/Ta) support, the latter available by RFQ. The product specification lists these as the recommended evaporation sources for proper deposition.
What is the significance of the Z-ratio 0.628 for this Titanium evaporation material?
The Z-ratio of 0.628 is a material-specific parameter used to calibrate quartz crystal microbalance (QCM) sensors during thin film deposition. It corrects for the acoustic impedance mismatch between the crystal and the deposited Titanium film, ensuring accurate thickness monitoring. This value is explicitly stated in the product's technical specifications.
Technical evaluation of Titanium (Ti) Evaporation Material, Wire, 99.9%, Dia. 1.0 mm confirms suitability for e-beam evaporation with defined purity, wire form, and Z-ratio, but requires careful source matching and is not recommended for standard thermal evaporation without qualified setup.
Positive
- High-purity wire form with defined dimensions: 99.9% purity and 1.0 mm diameter wire provide consistent deposition behavior and predictable film properties for vacuum thin-film processes.
- Specified Z-ratio and melting point: Z-ratio of 0.628 and melting point of 1,660 °C allow precise e-beam evaporation parameter calculation and process reproducibility.
Trade-offs
- Thermal evaporation limited to qualified setups: E-beam evaporation is strongly preferred; thermal evaporation is only feasible for thin charges or specially configured systems, restricting general thermal boat use.
- Evaporation source compatibility requires RFQ confirmation: Water-cooled e-beam hearth or W/Ta support must be validated via RFQ, adding a procurement step and potential lead time for hardware matching.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
