ATOMFAIR SVP286 SECONDARY VACUUM PACKAGING MACHINERESEARCH GRADE EQUIPMENT
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
TAILORED SOLUTIONS FOR RESEARCH
Contact our engineering team for technical support or official institutional quotations.
EMAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The SVP286 requires a compressed air supply of 0.5–0.7 MPa and a 220V/50Hz power source for operation. The copper sealing heads must be cleaned periodically to maintain heat transfer efficiency and sealing quality.
- Compressed Air Requirement: Operate the machine only with a compressed air supply of 0.5–0.7 MPa to ensure proper pneumatic function.
- Sealing Head Maintenance: Clean the copper sealing heads periodically to prevent residue buildup that degrades heat transfer and sealing consistency.
- Vacuum Calibration: Calibrate the vacuum degree (up to -95 kPa) and sealing pressure (0–7 kg/cm²) according to specific battery packaging process requirements.
- Puncture Configuration: Configure the automatic puncture function according to process specifications before initiating production runs.
This procedure covers the setup, operation, and adjustment of the SVP286 for vacuum-assisted edge-sealing of soft-packaged lithium battery cells. Follow these steps in sequence to ensure safe and consistent sealing results.
Required Equipment: SVP286 Secondary Vacuum Packaging Machine, Compressed air supply (0.5–0.7 MPa), Pressure regulating valve, User manual
- Connect utilities
Connect the machine to a 220V/50Hz power source and a compressed air supply of 0.5–0.7 MPa. - Set sealing parameters
Set the sealing head temperature (room temperature to 250°C), pressure (0–7 kg/cm²), and time (0–99 s) using the control panel. - Adjust vacuum and puncture
Adjust the vacuum degree (up to -95 kPa) and configure the automatic puncture function according to process specifications. - Load the battery cell
Place the soft-packaged battery cell onto the lower sealing head, ensuring proper alignment with the edge-sealing area. - Initiate the sealing cycle
Activate the sealing cycle to automatically puncture, vacuum, and edge-seal the battery cell. - Inspect the seal
Inspect the edge-seal for uniformity and integrity, verifying that the sealing width and parallelism meet quality standards. - Clean the sealing heads
Clean the copper sealing heads after production runs to remove residue and maintain heat transfer efficiency.
What is the maximum vacuum degree and how does it affect the final edge-sealing of soft-packaged lithium batteries?
The SVP286 achieves a maximum vacuum degree of -95 kPa, adjustable to match specific battery packaging requirements. This vacuum capability is critical for removing residual air before final edge-sealing, which directly impacts the sealing integrity and safety of soft-packaged lithium cells. The adjustable vacuum allows operators to optimize the process for different cell specifications, ensuring consistent, void-free seals that meet quality standards.
How does the copper sealing head's temperature control precision (±1.5°C) influence sealing quality and energy consumption?
The copper sealing head provides excellent heat transfer efficiency, enabling precise temperature regulation within ±1.5°C from room temperature up to 250°C. This precision ensures uniform heat distribution across the sealing area, which is essential for consistent edge-sealing quality across production batches. The high thermal conductivity of copper also reduces power consumption compared to less conductive materials, offering energy savings while maintaining the tight temperature control required for reliable seals on soft-packaged lithium batteries.
What are the compressed air and power supply requirements for operating the SVP286 in a research or production environment?
The SVP286 requires a compressed air supply of 0.5–0.7 MPa and operates on a 220V/50Hz power source with a power consumption of 900W. These infrastructure requirements are essential for the air-cylinder-driven sealing heads and vacuum system to function correctly. Ensuring a stable compressed air supply within the specified range is critical for maintaining the adjustable sealing pressure (0–7 kg/cm²) and achieving consistent, high-quality edge seals. The equipment's compact footprint (500×500×700 mm) and 100 kg weight facilitate integration into existing lab or production lines.
The Atomfair SVP286 secondary vacuum packaging machine delivers ±1.5°C temperature-controlled copper sealing heads and adjustable vacuum to -95 kPa, purpose-built for soft-packaged lithium battery edge-sealing. Its dual linear guide sleeve drive ensures sealing-head parallelism, while the integrated automatic puncture function streamlines special process requirements in a compact 500 × 500 × 700 mm footprint.
Positive
- Precise copper sealing head control: The 250°C copper sealing head with ±1.5°C temperature precision ensures consistent edge-sealing quality across batches while reducing power consumption through excellent heat transfer efficiency.
- Integrated automatic puncture function: The built-in automatic puncture mechanism with 0-7 kg/cm² adjustable pressure eliminates the need for separate puncture equipment, streamlining the battery packaging workflow for special process requirements.
Trade-offs
- Requires compressed air infrastructure: Operation mandates a compressed air supply of 0.5–0.7 MPa, which may require additional laboratory or production line infrastructure investment where such utilities are not already available.
- Periodic sealing head maintenance needed: The copper sealing heads require periodic cleaning to maintain optimal heat transfer efficiency, adding a routine maintenance step that must be factored into operational schedules.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
