|
Sintered Titanium and Porous Titanium Foam Sheet, 50 µm Filtration Rating, 100 × 100 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Recommended service temperature does not exceed 300°C. The porous surface must be protected from crushing and contamination during handling and cleaning.
- Media Compatibility: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
- Cleaning Constraints: Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, selected according to the process medium and operating procedure.
Protect the porous surface from crushing and contamination during handling. Select cleaning method based on process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, avoiding abrasive tools that could damage the porous structure. - Rinse and dry
Rinse the sheet with compatible solvent and dry it in a clean environment before reuse.
How does the 110 PPI pore density relate to the 50 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure density, while the 50 µm rating specifies filtration precision. The sheet has approximately 0.23 mm cell spacing and 35–45% porosity with interconnected pores. These are independent parameters; both must be reviewed together to match the sheet to an assembly's required flow and separation performance.
Can this sintered titanium foam sheet be cut, welded, or machined for custom integration?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration, as stated in the performance features. However, the porous surface must be protected from crushing and contamination during any modification. Custom dimensions are also available upon consultation with the manufacturer.
What cleaning methods are recommended for this porous titanium foam sheet to maintain its filtration performance?
Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures. The appropriate method depends on the process medium and operating procedure. The sheet should be protected from crushing and contamination during handling to preserve the open-pore structure.
Sintered porous titanium foam sheet with 50 µm filtration rating, 110 PPI cellular structure, and 35–45% porosity offers corrosion resistance, thermal stability up to 300°C, and low flow resistance for solid-liquid and gas separations, but requires careful handling to avoid surface damage and media-compatibility confirmation before deployment.
Positive
- Corrosion resistance and thermal stability: Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, supporting use in aggressive chemical and high-temperature process streams up to 300°C.
- Low flow resistance and cleanability: Interconnected open-pore structure with 35–45% porosity and 1×10⁻³ L/(cm²·min·Pa) relative air permeability enables low-pressure-drop filtration, and the metallic construction allows backflushing, steam, ultrasonic, or chemical cleaning for reuse.
Trade-offs
- Service temperature limit 300°C: Recommended service temperature is ≤300°C; exceeding this limit may compromise structural integrity and filtration performance in high-temperature applications.
- Surface damage and contamination risk: Porous surface must be protected from crushing and contamination during handling and installation; improper cleaning or mechanical impact can alter pore structure and reduce filtration precision.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
