|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 200 × 200 × 2 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Handling and compatibility constraints for a sintered porous titanium foam sheet. The sheet must be protected from crushing and contamination, and media compatibility must be confirmed before installation.
- Media Compatibility: Confirm chemical compatibility of the process medium with the titanium or titanium-alloy structure before installation.
- Temperature Limit: Maintain service temperature at or below 300°C.
- Mechanical Protection: Protect the porous sheet from crushing loads and surface contamination during handling and storage.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Assembly Integration: Cut, weld, or machine the sheet only as needed for assembly integration.
Procedure to handle, install, and clean a sintered porous titanium foam sheet. Confirm compatibility and protect the porous structure before service.
- Confirm compatibility
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before quotation or installation. - Protect the porous structure
Protect the porous surface from crushing and contamination during handling and storage. - Review pore density and filtration rating
Review the cellular pore density and filtration rating together when matching the sheet to an assembly. - Clean according to process
Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure. - Verify service temperature
Verify the service temperature stays at or below 300°C during operation.
How does the 110 PPI pore density relate to the 30 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) and 30 µm filtration rating are independent parameters. PPI describes the cellular structure's density, while the micrometre value describes the filtration precision. The 110 PPI structure has an approximate cell spacing of 0.23 mm and 35–45% porosity, providing interconnected flow paths. The 30 µm rating ensures particles of that size are retained. The relative air permeability is 5×10^-4 L/(cm²·min·Pa), and the general filtration range is 0.45–100 µm.
What are the temperature and media compatibility limitations for the 30 µm sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility, operating pressure, and temperature should be reviewed before installation. The sheet is suitable for water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, and other applications, but specific chemical compatibility must be verified.
What cleaning and handling procedures are recommended for maintaining the 30 µm sintered titanium foam sheet?
The porous surface must be protected from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid damaging the porous structure.
This 200 × 200 × 2 mm sintered titanium foam sheet pairs a 30 µm filtration rating with an 110 PPI interconnected pore structure (35–45% porosity, ~0.23 mm cell spacing) and a ≤300°C recommended service temperature, making it suitable for liquid/gas separation, porous-electrode, and flow-distribution studies where titanium media compatibility is confirmed.
Positive
- Interconnected porous titanium flow structure: The 110 PPI sintered sheet provides 35–45% porosity with approximately 0.23 mm cell spacing and interconnected through-pores, supporting 30 µm filtration with low flow resistance and uniform pore distribution for stable separation and controlled filtration.
- Corrosion-resistant reusable metallic construction: The titanium or titanium-alloy framework offers corrosion resistance, heat tolerance, cleanability, and reuse in compatible process media. Its metallic construction also supports cutting, welding, and basic machining for assembly integration.
Trade-offs
- Recommended service temperature capped at 300°C: The sheet is rated for a recommended service temperature of ≤300°C, so higher-temperature process streams require additional material-compatibility review before installation.
- Porous surface needs handling and cleaning care: The open-pore surface must be protected from crushing and contamination during handling. Cleaning should be selected from backflushing, steam, ultrasonic, or compatible chemical procedures based on the process medium.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
