|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 20 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires careful media compatibility and temperature verification before use. The porous structure must be protected from crushing and contamination during handling and cleaning.
- Media Compatibility: Verify media compatibility, operating pressure, temperature, and target flow before installation to prevent chemical attack or structural failure.
- Temperature Limit: Do not exceed 300°C service temperature to avoid sintering degradation or dimensional distortion.
- Handling Precautions: Protect the porous surface from crushing, impact, and contamination during handling and storage to maintain filtration integrity.
- Cleaning Procedures: Select backflushing, steam, ultrasonic, or compatible chemical cleaning methods based on the process medium and operating procedure to avoid damage.
- Machining Guidelines: Cutting, welding, and basic machining are permissible but must be performed with care to avoid clogging or deforming the porous structure.
How does the 30 µm filtration rating interact with the 20 PPI pore density to affect flow resistance and separation efficiency in this sintered titanium foam sheet?
The 30 µm filtration rating specifies the particle size cut-off, while the 20 PPI (pores per inch) defines the cellular structure with ~1.27 mm cell spacing and 35–45% porosity. The interconnected open-pore structure provides low flow resistance, quantified by a relative air permeability of 5 × 10⁻⁴ L/(cm²·min·Pa). The combination enables stable separation with controlled flow for solid-liquid and gas-solid applications.
What are the maximum service temperature and pressure limitations for the Atomfair AF-T20-E2030 titanium foam sheet?
The recommended service temperature is ≤300°C, as stated in the technical specifications. The source does not provide a specific maximum pressure rating; it advises reviewing operating pressure, temperature, media compatibility, and target flow before quotation or installation. The metallic porous structure offers corrosion resistance and thermal stability, but pressure limits depend on the specific assembly and application.
What cleaning methods are recommended for the sintered porous titanium sheet to preserve its filtration performance?
The product description recommends backflushing, steam, ultrasonic, and compatible chemical cleaning procedures, depending on the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling and cleaning to maintain the 30 µm filtration precision and 35–45% porosity.
This 120 × 120 × 20 mm sintered titanium foam sheet pairs a 30 µm filtration rating with a 20 PPI open-cell structure (35–45% porosity), making it suitable for lab-scale filtration, catalyst recovery, and flow-distribution trials where corrosion resistance and ≤300°C service are required.
Positive
- Dual filtration and permeability structure: The 30 µm filtration rating combines with a 20 PPI cellular network and 35–45% porosity, giving interconnected through-pores for liquid or gas flow with low resistance in compatible process conditions.
- Corrosion-resistant and cleanable titanium matrix: High-vacuum sintered titanium or titanium-alloy powder provides corrosion resistance and thermal tolerance up to 300°C, with cleaning options including backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Porous surface requires careful handling: The open-pore structure must be protected from crushing and contamination, and cleaning methods should be chosen according to the process medium and operating procedure.
- Operating parameters must be pre-verified: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation, with recommended service temperature limited to ≤300°C.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
