|
Sintered Titanium and Porous Titanium Foam Sheet, 30 µm Filtration Rating, 120 × 120 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium foam sheet is a passive filtration medium with a recommended service temperature limit of 300°C. The porous structure must be protected from crushing and contamination, and cleaning methods must be matched to the process medium.
- Temperature Limit: Recommended service temperature does not exceed 300°C.
- Mechanical Protection: Protect the porous surface from crushing and contamination during handling.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Cleaning Procedure Selection: Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Specification Matching: Review PPI and micrometre filtration rating together when matching the sheet to an assembly.
Follow these steps to inspect the sintered titanium foam sheet and prepare it for installation. Verify operating conditions and protect the porous structure before service.
- Inspect Shipment
Inspect the delivered sheet for crushing damage or visible surface contamination before use. - Verify Compatibility
Confirm filtration rating, PPI, dimensions, operating pressure, temperature, and media compatibility before installation. - Protect Porous Surface
Protect the porous surface from crushing and contamination during mounting and assembly. - Select Cleaning Method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
What is the relationship between the 30 µm filtration rating and the 20 PPI pore density in this sintered titanium foam sheet?
The 30 µm filtration rating and 20 PPI pore density are independent parameters. The filtration rating (30 µm) defines the particle size retention, while the PPI (pores per inch) describes the cellular structure's density. The sheet has approximately 1.27 mm cell spacing and 35–45% porosity, providing interconnected flow paths. Both values must be considered together when matching the sheet to an assembly, as the PPI influences flow resistance and mechanical strength.
Can this 120×120×10 mm sintered titanium foam sheet be welded or machined for custom assembly integration?
Yes, the metallic titanium construction supports cutting, welding, and basic machining for assembly integration. The sheet is made from titanium or titanium-alloy powder through high-vacuum sintering, and its metallic structure can be modified. However, care must be taken to protect the porous surface from crushing and contamination during processing. Custom dimensions are also available upon consultation.
What cleaning methods are recommended for this 30 µm porous titanium foam sheet to maintain filtration performance?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures. The choice depends on the process medium and operating procedure. The porous structure supports reuse and cleanability, but the surface should be protected from crushing and contamination. The sheet's 35–45% porosity and interconnected pores allow effective cleaning without damaging the filtration rating.
The 120 × 120 × 10 mm sintered porous titanium sheet combines a 30 µm filtration rating with a 20 PPI open-cell structure, interconnected 35–45% porosity, and a metallic frame that supports cutting, welding, and basic machining. Deployment requires confirming media compatibility, operating pressure, temperature, and dimensional fit before installation.
Positive
- Interconnected poros network: The 20 PPI cellular structure with approximately 1.27 mm cell spacing and 35–45% porosity provides interconnected through-pore pathways for solid-liquid, gas-solid, and gas-liquid separation while maintaining relatively low flow resistance.
- Cleanable corrosion-resistant metal structure: The titanium-based sintered structure offers corrosion resistance, heat tolerance, and reusability in compatible media, and it can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require separate evaluation before the sheet is integrated into an assembly.
- Porous surface requires handling care: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, target flow, and dimensional tolerance must be reviewed before quotation or installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
