|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document identifies the service and handling constraints that apply to the sintered porous titanium foam sheet. Review these limits before integrating the sheet into a filtration assembly.
- Service Temperature Limit: Do not exceed the maximum recommended service temperature during continuous operation.
- Media Compatibility Review: Review media compatibility, operating pressure, target flow, and dimensional tolerance before quotation or installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning Method Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Integration: The metallic construction supports cutting, welding, and basic machining for assembly integration.
This procedure describes safe handling and cleaning of the sintered porous titanium foam sheet. It covers receipt inspection, compatibility verification, surface protection, and cleaning method selection.
Required Equipment: Ultrasonic cleaner, Backflushing apparatus, Steam cleaning equipment, Compatible chemical cleaning agent
- Inspect
Inspect the sheet upon receipt for visible crushing, deformation, or contamination of the porous surface. - Verify
Verify media compatibility and confirm that operating pressure and temperature remain within the stated limits before installation. - Protect
Protect the porous surface from crushing and contamination during handling, storage, and installation. - Clean
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the 20 µm filtration rating relate to the 110 PPI pore density, and what are the trade-offs in flow rate vs. retention?
The 20 µm filtration rating specifies the particle size retained, while the 110 PPI (pores per inch) defines the cellular structure density. The 0.23 mm cell spacing and 35–45% porosity create interconnected flow paths, with a relative air permeability of 1 × 10⁻⁴ L/(cm²·min·Pa). Higher PPI generally increases retention but reduces flow; this sheet balances both for applications requiring 20 µm precision with moderate throughput.
What are the maximum service temperature and media compatibility constraints for this titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but operating pressure, temperature, and media compatibility must be reviewed before installation. The source explicitly states these parameters should be confirmed during procurement to avoid premature failure or performance degradation.
How should the sintered titanium foam sheet be handled, cleaned, and integrated into an assembly without damaging the porous structure?
Protect the porous surface from crushing and contamination. The metallic construction supports cutting, welding, and basic machining for assembly integration. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical cleaning procedures, depending on the process medium and operating protocol.
This sintered titanium foam sheet combines a 20 µm filtration rating with a 110 PPI cellular structure, 35–45% interconnected porosity, and 0.23 mm cell spacing in a 200 × 200 × 3 mm format; its titanium construction supports corrosion resistance, heat tolerance, and cleanability, while service temperature is limited to 300°C and the porous surface requires protective handling.
Positive
- Interconnected porous structure with low flow resistance: The 35–45% interconnected through-pore network and 0.23 mm cell spacing preserve open pathways for liquids and gases, enabling stable 20 µm filtration while supporting the stated low flow resistance and relative air permeability.
- Corrosion-resistant, cleanable metallic construction: Formed from titanium or titanium-alloy powder via high-vacuum sintering, the sheet provides corrosion resistance, heat tolerance, and reuse through backflushing, steam, ultrasonic, or compatible chemical cleaning in appropriate process conditions.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so the sheet must not be used in higher-temperature filtration, gas purification, or thermal-management processes without confirming system compatibility.
- Porous surface requires protective handling: The porous surface must be protected from crushing and contamination, and the cleaning method must be matched to the process medium and operating procedure; media compatibility, pressure, temperature, and flow should be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
