|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 200 × 200 × 2.8 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Handling and integration must avoid crushing, contamination, and exposure above the recommended service temperature. Media compatibility must be confirmed before use, and cleaning methods must match the process medium and operating procedure.
- Thermal exposure boundary: Do not exceed 300°C service temperature unless the titanium alloy grade and atmosphere are validated for the intended application.
- Media compatibility confirmation: Confirm chemical compatibility of the process medium with the titanium or titanium-alloy substrate before installation, because corrosion resistance applies only in compatible conditions.
- Pore structure protection: Protect the porous surfaces from crushing and contamination during handling, storage, and assembly to preserve filtration rating and flow characteristics.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure to avoid damaging the porous structure.
- Machining and debris control: Use cutting, welding, or basic machining only with methods appropriate for porous titanium, and verify that chips or debris do not become embedded in the open-cell structure.
This procedure verifies compatibility and cleans the sintered porous titanium sheet before installation or service. Each step follows documented handling and cleaning guidance for porous metallic media.
Required Equipment: Ultrasonic cleaner, Backflushing apparatus, Steam cleaning equipment, Chemical cleaning bath
- Inspect the sheet
Inspect the sheet visually and by touch for crushed areas, embedded debris, or other contamination before handling. - Verify compatibility
Verify that the process medium, operating temperature, and pressure are compatible with the titanium or titanium-alloy substrate by reviewing the material grade and service limits. - Select a cleaning method
Select a cleaning method based on the process medium and the contamination type, choosing among backflushing, steam, ultrasonic, or chemical cleaning. - Clean the sheet
Clean the sheet using the selected method while avoiding mechanical force that could crush the porous structure. - Rinse and dry
Rinse the sheet with a compatible solvent or clean water, then allow it to dry completely before installation or storage. - Store safely
Store the cleaned sheet in a clean, dry environment with the porous surface protected from impact and contamination.
What is the maximum recommended service temperature for this sintered titanium foam sheet, and how does it affect its structural integrity?
The maximum recommended service temperature is ≤300°C. Exceeding this limit may compromise the titanium structure's mechanical integrity, as the material's corrosion resistance and thermal stability are specified for this temperature range. The sheet's bulk density of 2.48–2.93 g/cm³ and porosity of 35–45% are stable within this limit, but operation above 300°C is not recommended by the manufacturer.
Can this 200×200×2.8 mm titanium foam sheet be cut or welded to fit custom assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, care must be taken to avoid damaging the porous structure or clogging the interconnected flow paths. The sheet's 20 µm filtration rating and 20 PPI pore density should be preserved during any modification.
What cleaning methods are recommended for this porous titanium foam sheet to avoid clogging or damage?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The porous surface must be protected from crushing and contamination. The appropriate method depends on the process medium and operating procedure, and the sheet's titanium construction allows for repeated cleaning without degradation.
This 200 × 200 × 2.8 mm sintered titanium foam sheet pairs a 20 µm filtration rating with a 20 PPI interconnected porous structure at 35–45% porosity, providing low flow resistance and corrosion-resistant separation over a 0.45–100 µm general filtration range. Practical deployment is bounded by a 300°C recommended service limit and the need to protect the porous surface from crushing and contamination during handling.
Positive
- 20 µm filtration in 20 PPI open-cell matrix: The sintered titanium sheet combines a 20 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, supporting solid-liquid, gas-solid and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable metallic media: The titanium-based porous structure offers corrosion resistance and thermal stability in compatible media, and can be cleaned by backflushing, steam, ultrasonic or compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so the sheet should not be assumed suitable for higher-temperature streams; operating temperature and media compatibility must be confirmed before installation.
- Porous surface requires crush and contamination protection: The porous surface must be protected from crushing and contamination during handling, and the cleaning method must be selected according to the process medium to preserve filtration performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
