|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 200 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the technical constraints for handling, integrating, and cleaning a sintered porous titanium foam sheet. It applies to laboratory and engineered filtration assemblies that use this titanium porous-media format.
- Surface Protection Requirement: Protect the porous surface from crushing and contamination during handling, installation, and storage.
- Media Compatibility Check: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Service Temperature Limit: Keep the operating temperature at or below the recommended service temperature for the sintered titanium foam sheet in compatible media.
- Integration Processing: Cut, weld, or machine the metallic sheet only in a way that preserves the interconnected porous structure and prevents pore blockage.
- Cleaning Method Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
This procedure covers the preparation, installation, and cleaning of a sintered porous titanium foam sheet in filtration or laboratory assemblies. Follow these steps to avoid pore blocking, surface damage, and incompatible process exposure.
Required Equipment: Backflushing equipment, Steam cleaning equipment, Ultrasonic cleaner
- Inspect the sheet
Inspect the sintered titanium sheet for visible pore blockage, crushing, or contamination before installation. - Confirm process compatibility
Confirm that process media, operating pressure, operating temperature, target flow, and dimensional tolerance are within the sheet's stated service limits. - Protect the porous surfaces
Protect the porous surfaces from crushing and contamination while positioning the sheet in the filtration assembly. - Integrate the sheet by approved methods
Cut, weld, or machine the sheet only in ways that preserve the interconnected porous structure and prevent pore blockage. - Clean according to the process medium
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical procedures selected for the process medium and operating conditions.
How does the 30 PPI pore density relate to the 100 μm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure, while the 100 μm filtration rating specifies the particle size retained. These are independent parameters that together define the balance between structural porosity and filtration precision. The sheet's 0.85 mm cell spacing and 35–45% porosity support open interconnected flow paths while achieving 100 μm retention, as stated in the product specifications.
What are the temperature and media compatibility limits for this porous titanium foam sheet?
The recommended service temperature is ≤300°C, based on the titanium and titanium-alloy construction. Media compatibility, operating pressure, and target flow must be reviewed before installation, as the product description advises confirming these parameters for each application. The material provides corrosion resistance in compatible media, but specific chemical compatibility should be verified against the process environment.
What cleaning and handling procedures are recommended for maintaining the porous structure of this titanium foam sheet?
The product description specifies cleaning options including backflushing, steam, ultrasonic, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during handling and installation. These cleaning methods help preserve the interconnected pore structure (35–45% porosity) and 100 μm filtration rating over repeated use.
This 100 µm, 30 PPI sintered titanium foam sheet (200×200×5 mm) provides 35-45% porosity with interconnected pores, corrosion resistance, and low flow resistance, suitable for filtration and separation tasks in chemical and pharmaceutical processes, but limited to ≤300°C service temperature and requiring careful handling to avoid damage.
Positive
- Corrosion-resistant and heat-tolerant: Titanium construction provides corrosion resistance and thermal stability up to 300°C in compatible media, making it durable for aggressive chemical and petrochemical environments.
- Low flow resistance and cleanable: The 35-45% open porosity and 30 PPI structure enable low flow resistance while allowing backflushing, ultrasonic, or chemical cleaning for reuse, reducing replacement frequency.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature of ≤300°C restricts use in high-temperature processes above this threshold, which may require alternative materials for higher thermal duties.
- Porous surface requires careful handling: The porous structure is susceptible to crushing and contamination, necessitating protective handling, cleaning protocol validation, and media compatibility checks before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
