|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 10 mm, 80 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet is limited to service temperatures at or below 300°C and requires process-specific media compatibility review before installation. The porous surface must be protected from crushing and contamination, and cleaning must be matched to the process medium and operating procedure.
- Service Temperature Limit: Operate the sheet only at service temperatures at or below 300°C.
- Media Compatibility Review: Review the process medium against the titanium or titanium-alloy structure before installation.
- Mechanical Protection Requirement: Protect the porous surface from crushing forces and contamination during handling and storage.
- Cleaning Procedure Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Integration Machining Constraint: Use cutting, welding, or basic machining methods appropriate for titanium when integrating the sheet into an assembly.
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerances before installation. Protect the porous surface from crushing and contamination, then install and clean the sheet according to the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic cleaner
- Verify compatibility
Verify media compatibility, operating pressure, temperature, target flow, and dimensional tolerance against the application before installation. - Protect porous surface
Protect the porous surface from crushing and contamination during handling, storage, and assembly. - Install into assembly
Mount the sheet into the assembly using cutting, welding, or basic machining methods compatible with sintered titanium. - Clean according to process
Clean the sheet by backflushing, steam, ultrasonic, or compatible chemical procedures selected according to the process medium and operating procedure.
How do the 80 PPI pore density and 100 µm filtration rating relate, and what does that mean for separation performance?
The 80 PPI value describes the cellular pore density (pores per inch), while the 100 µm value specifies the filtration precision—the size of particles retained. Together they indicate a structure with approximately 0.32 mm cell spacing and 35–45% porosity that provides interconnected flow paths. This combination supports solid-liquid, gas-solid, and gas-liquid separation with controlled particle retention at 100 µm while maintaining low flow resistance through the open porous network.
What are the operating temperature limits and material compatibility considerations for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but media compatibility must be reviewed before installation. The sheet is made from titanium or titanium-alloy powder through high-vacuum sintering, and its bulk density ranges from 2.48 to 2.93 g/cm³ at 35–45% porosity.
What cleaning and handling procedures are recommended for maintaining the porous structure and filtration performance?
Protect the porous surface from crushing and contamination during handling. Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures, selected according to the process medium and operating procedure. The metallic construction also supports cutting, welding, and basic machining for assembly integration.
This 160 × 160 × 10 mm sintered titanium sheet is evaluated as an 80 PPI, 100 µm filter medium with 35–45% interconnected porosity, suited to liquid/gas and multiphase separation trials. Its weldable titanium structure holds corrosion resistance up to 300°C, but the open-cell surface requires crush protection and process-compatibility confirmation before installation.
Positive
- Interconnected porosity with low flow resistance: The 35–45% open, through-pore titanium framework supports solid-liquid, gas-solid, and gas-liquid separation while maintaining low flow resistance for the 160 × 160 × 10 mm sheet.
- Cuttable, weldable, and cleanable titanium structure: The metallic sintered construction permits cutting, welding and basic machining for assembly integration, and supports backflushing, steam, ultrasonic or compatible chemical cleaning for reuse.
Trade-offs
- Porous surface needs crush and contamination protection: The open-cell titanium surface must be protected from crushing and contamination during handling, storage, and installation; mechanical damage or debris ingress can block the interconnected flow paths.
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so thermal-management, steam purification, or hot-gas applications must be designed to remain at or below this ceiling.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
