|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 120 × 120 × 10 mm, 80 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must not exceed 300°C recommended service temperature to avoid structural degradation. The porous surface must be protected from crushing and contamination during handling and cleaning.
- Temperature Limit: Recommended service temperature is ≤300°C.
- Surface Protection: Protect the porous surface from crushing and contamination.
- Cleaning Compatibility: Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures.
- Media Compatibility: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation.
Protect the porous surface from crushing and contamination during handling. Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before handling. - Protect the porous surface
Protect the porous surface from crushing or impact during transport and installation. - Select a cleaning method
Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure. - Apply the cleaning procedure
Apply the chosen cleaning procedure according to manufacturer guidelines to avoid damaging the porous structure. - Verify media compatibility
Verify media compatibility, operating pressure, temperature, and target flow before installation.
What is the difference between the PPI rating and the micron filtration rating for this sintered titanium foam sheet?
PPI (pores per inch) describes the cellular structure density, while the micron rating indicates filtration precision. For this sheet, 80 PPI yields approximately 0.32 mm cell spacing, and the 100 µm filtration rating defines the particle retention size. The two parameters are independent: PPI affects flow resistance and mechanical properties, whereas the micron rating determines the smallest particles retained. Both must be reviewed together when matching the sheet to an assembly.
What is the maximum recommended service temperature for this porous titanium sheet?
The recommended maximum continuous service temperature is 300°C. This limit is specified in the technical data for the sintered titanium structure, which retains corrosion resistance and thermal stability within that range. Operating above 300°C may degrade the porous framework or compromise material integrity, so temperature must be confirmed against the process conditions before installation.
What cleaning methods are compatible with this sintered titanium foam sheet?
Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The metallic construction withstands these approaches, but the porous surface must be protected from crushing and contamination. The choice of method depends on the process medium and operating procedure, as stated in the handling and cleaning notes.
This 120 × 120 × 10 mm sintered titanium foam sheet provides 100 µm filtration with an 80 PPI interconnected pore network, 35–45% porosity, and a ≤300°C service temperature for lab-scale filtration, catalyst recovery, and porous-electrode evaluations.
Positive
- 100 µm rating with 80 PPI cellular structure: The 100 µm filtration precision combined with an 80 PPI porous-cell structure and ~0.32 mm cell spacing supports controlled separation and stable flow distribution in solid-liquid, gas-solid, and gas-liquid filtration applications.
- Interconnected porosity supports cleaning and reuse: The sintered titanium framework contains interconnected through-pore paths at 35–45% porosity, enabling backflushing, steam, ultrasonic, or compatible chemical cleaning while retaining corrosion resistance and heat tolerance in compatible media.
Trade-offs
- Service temperature limited to ≤300°C: Recommended service temperature is ≤300°C; higher-temperature or incompatible process streams require material-grade and media-compatibility review before installation.
- Porous surface needs crush protection: The open porous surface must be protected from crushing and contamination; media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before quotation or installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
