|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 10 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet must be used within a recommended service temperature of ≤300°C to maintain structural integrity. The porous surface requires protection from crushing and contamination to preserve filtration performance.
- Temperature Limit: Do not exceed 300°C service temperature to avoid degradation of the sintered titanium structure.
- Surface Protection: Protect the porous surface from mechanical crushing and contamination during handling and storage.
- Media Compatibility: Verify media compatibility with the titanium alloy before installation to prevent corrosion or fouling.
- Cleaning Procedures: Select backflushing, steam, ultrasonic, or chemical cleaning methods based on the process medium and operating procedure.
- Machining Allowance: Cutting, welding, and basic machining are permitted for assembly integration but must avoid damaging the porous network.
How does the 60 PPI cellular structure affect the filtration performance and flow resistance of the 10 µm titanium foam sheet?
The 60 PPI structure with approximately 0.42 mm cell spacing and 35–45% porosity creates interconnected pathways that enable a 10 µm filtration rating. The relative air permeability is 5 × 10⁻⁵ L/(cm²·min·Pa), indicating low flow resistance. The combination of pore density and porosity balances filtration precision with throughput.
What are the recommended cleaning and regeneration procedures for the sintered titanium foam sheet to maintain its filtration efficiency?
The titanium foam sheet can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures. The source recommends protecting the porous surface from crushing and contamination. Cleaning method should be chosen based on the process medium and operating procedure to preserve the 35–45% porosity and interconnected pore structure.
What are the thermal and chemical compatibility limits for the 10 µm sintered titanium foam sheet in industrial filtration applications?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but specific media compatibility and operating pressure should be reviewed before installation. The material is titanium or titanium alloy, offering thermal stability and corrosion resistance.
This sintered titanium foam sheet combines 10 µm filtration precision with a 60 PPI interconnected cellular structure, providing corrosion resistance and thermal stability up to 300°C for solid-liquid, gas-solid, and gas-liquid separation in a 160 × 160 × 10 mm format. The 35–45% porosity and metallic construction support backflushing, ultrasonic, and chemical cleaning, though the porous surface requires protection from crushing and contamination during handling.
Positive
- 10 µm filtration with 60 PPI cellular structure: The 10 µm filtration rating paired with a 60 PPI porous-cell structure enables precise solid-liquid, gas-solid, and gas-liquid separation while maintaining open flow paths, with approximate cell spacing of 0.42 mm.
- Corrosion-resistant titanium construction: Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, with a recommended service temperature up to 300°C, suitable for chemical, pharmaceutical, and water treatment filtration.
Trade-offs
- Temperature limit of 300°C: Recommended service temperature is ≤300°C, limiting use in high-temperature processes above this threshold without material degradation or loss of structural integrity.
- Fragile porous surface requiring careful handling: The porous surface must be protected from crushing and contamination; cleaning methods (backflushing, steam, ultrasonic, chemical) must be chosen based on process medium to avoid damage.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
