|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 10 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium and operating procedure.
- Service Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Media Compatibility Requirement: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation.
- Machining Constraint: Metallic construction supports cutting, welding, and basic machining for assembly integration.
Protect the porous surface from crushing and contamination during handling and storage. Select a cleaning method appropriate for the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method to remove trapped particulates without damaging the porous structure. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reinstallation.
How does the combination of a 40 PPI cellular structure and a 10 µm filtration rating affect flow resistance in this sintered titanium foam sheet?
The relative air permeability is specified as 5×10⁻⁵ L/(cm²·min·Pa), indicating low flow resistance through the interconnected porous network with porosity of 35–45%. The combination allows fine particle retention at 10 µm while maintaining open pathways for liquid or gas flow.
What is the maximum recommended service temperature for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C based on technical specifications. Exceeding this limit may compromise structural integrity due to thermal effects on the sintered titanium matrix.
Can this sintered titanium foam sheet be cut or machined for custom integration into an assembly?
Yes; its metallic construction supports cutting welding and basic machining for assembly integration as stated in performance features. However care must be taken to protect the porous surface from crushing during handling.
This sintered titanium foam sheet provides 10 µm filtration precision with a 40 PPI cellular structure, offering interconnected pathways for fluid separation while maintaining corrosion resistance and thermal stability up to 300°C.
Positive
- 10 µm filtration with 40 PPI structure: The combination of 10 µm filtration rating and 40 PPI pore density allows fine particulate retention while maintaining open flow paths, suitable for solid-liquid and gas-liquid separation.
- Corrosion-resistant and cleanable: Titanium construction provides corrosion resistance in compatible media, and the sheet can be cleaned by backflushing, steam, ultrasonic, or chemical methods, enabling reuse.
Trade-offs
- Temperature limit of 300°C: The recommended service temperature is ≤300°C, restricting use in high-temperature processes without additional cooling or material substitution.
- Fragile porous surface: The porous surface must be protected from crushing and contamination during handling, requiring careful installation and cleaning procedures to maintain structural integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
