|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 120 × 120 × 10 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface is susceptible to crushing and contamination, requiring protection during handling and storage. Recommended service temperature does not exceed 300°C, and media compatibility must be verified before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility with the titanium alloy under expected operating pressure and temperature before use.
Inspect the sheet for damage before installation and select a cleaning method appropriate for the process medium. Protect the porous surface from crushing and contamination throughout use.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed by clamping forces. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, following manufacturer guidelines for duration and intensity. - Rinse and dry the sheet
Rinse the sheet with compatible solvent or deionized water and dry it in a clean environment before reuse.
How does the 40 PPI pore density relate to the 10 μm filtration rating in this sintered titanium foam sheet?
The 40 PPI (pores per inch) describes the cellular structure density, while the 10 μm rating indicates the filtration precision for particle retention. These two parameters are independent but must be evaluated together for proper application matching, as the PPI governs the pore framework and the micron rating determines the actual separation cut-off.
What is the maximum operating temperature for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. This limit is based on the titanium material properties and the sintered structure; exceeding it may compromise structural integrity and filtration performance. The source explicitly states this temperature bound for safe operation.
What cleaning methods are recommended to maintain the 10 μm filtration performance of this porous titanium foam sheet?
Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures. The choice depends on the process medium and operating procedure, as the porous surface must be protected from crushing and contamination to preserve the 10 μm filtration rating.
This 120 × 120 × 10 mm sintered porous titanium foam sheet provides a 10 µm filtration rating with a 40 PPI cellular structure and 35–45% interconnected porosity, supporting solid-liquid, gas-solid, and gas-liquid separation with a stated air permeability of 5 × 10^-5 L/(cm²·min·Pa). The corrosion-resistant titanium network is rated for service up to 300°C and is cleanable by backflushing, steam, ultrasonic, or compatible chemical methods.
Positive
- Interconnected porous titanium network: The 35–45% porosity with interconnected through-pore pathways supports solid-liquid, gas-solid, and gas-liquid separation while maintaining an air permeability of 5 × 10^-5 L/(cm²·min·Pa).
- Corrosion-resistant and cleanable metallic structure: The titanium-based, high-vacuum sintered construction provides corrosion resistance, thermal stability, and reuse in compatible media, with cleaning options including backflushing, steam, ultrasonic, and chemical procedures.
Trade-offs
- Limited to 300°C service temperature: The recommended service temperature is ≤300°C, so higher-temperature filtration, gas purification, or thermal-management operation requires material-grade and application review before installation.
- Porous surface requires crush and contamination protection: The open-cell titanium surface must be protected from crushing and contamination; cleaning method selection depends on the process medium, and operational limits such as media compatibility, pressure, temperature, and flow must be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
