|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium structure is susceptible to mechanical crushing and pore blockage from particulate contamination. Media compatibility, operating pressure, and temperature must be verified before installation to prevent corrosion or structural failure.
- Mechanical Protection: Protect the porous surface from crushing forces and contamination during handling and storage.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to maintain structural integrity.
- Cleaning Compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning methods based on the process medium and operating procedure.
This procedure describes the safe handling and installation of a sintered porous titanium foam sheet into a filtration assembly. Proper sealing and support are required to prevent bypass and mechanical damage.
Required Equipment: Clean, lint-free gloves, Appropriate sealing gaskets or O-rings
- Inspect the sheet
Inspect the titanium foam sheet for visible damage, deformation, or contamination before installation. - Verify compatibility
Confirm that the sheet dimensions, filtration rating, and material grade match the assembly requirements and process conditions. - Install sealing elements
Place appropriate sealing gaskets or O-rings around the sheet perimeter to prevent fluid bypass. - Secure the sheet
Position the sheet in the housing and secure it evenly to avoid localized stress or crushing of the porous structure. - Verify flow direction
Confirm that the flow direction is consistent with the intended filtration or distribution application.
What is the relationship between the 110 PPI cellular structure and the 10 µm filtration rating on this sintered titanium foam sheet?
The 110 PPI (pores per inch) defines the cellular density with an approximate cell spacing of 0.23 mm, while the 10 µm filtration rating indicates the particle size cut-off. The product description notes that PPI describes the cellular structure and the micrometre value describes filtration precision, and both values must be reviewed together when matching the sheet to an assembly. The combination allows controlled filtration with low flow resistance due to the interconnected porous structure and 35–45% porosity.
What are the maximum service temperature and media compatibility constraints for the AF-T110-B0510 sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium material provides corrosion resistance, but media compatibility must be verified for specific process conditions; the product description states that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. It is suitable for applications such as water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, and oil filtration, among others.
What are the recommended cleaning and handling procedures for the 10 µm sintered titanium foam sheet to maintain filtration performance?
The product description advises protecting the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, selected according to the process medium and operating procedure. The metallic construction also supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid damaging the porous structure.
The 110 PPI sintered titanium foam sheet with a 10 µm filtration rating combines an interconnected 35–45% porous structure, approximately 0.23 mm cell spacing, and 5 × 10^-5 L/(cm²·min·Pa) relative air permeability in a 100 × 200 × 5 mm format, making it suitable for laboratory-scale solid-liquid, gas-solid, and gas-liquid separation trials. Service life is limited by the ≤300°C recommended temperature ceiling, and media compatibility, operating pressure, and flow requirements must be confirmed before installation.
Positive
- Interconnected 35–45% porosity: The sintered titanium framework forms interconnected through-pores with ~0.23 mm cell spacing at 110 PPI, supporting 10 µm filtration with low flow resistance across liquid-solid, gas-solid, and gas-liquid applications.
- Corrosion-resistant and cleanable metallic structure: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, and the sheet supports backflushing, steam, ultrasonic, or compatible chemical cleaning for reuse.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature process streams or sterilization conditions must be verified against this ceiling before deployment.
- Porous surface requires handling protection: The open porous surface must be protected from crushing and contamination, and cleaning methods such as backflushing, steam, ultrasonic, or chemical treatment must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
