|
Rhodium (Rh) Evaporation Material, Wire, 99.99%, Dia. 1.0 mm
Product Type: Pure Metal Evaporation Material
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For material selection, deposition-source matching, pack-size confirmation or quotation support, contact our technical sales team.
INQUIRY: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This material requires specific evaporation source hardware and process conditions for successful thin-film deposition. The deposition source geometry and route must be matched to the material's melting point and film requirements.
- Evaporation Source Compatibility: The material must be evaporated using a water-cooled e-beam hearth or W/Ta support, with thermal evaporation only suitable for thin charges or qualified setups.
- Process Route Matching: The deposition source geometry and process route must be matched to the material's melting point and target film requirements.
- Material Verification: The material identity, purity, form, and wire diameter must be confirmed for compatibility with the evaporation source before ordering.
- Documentation and Safety Review: Certificates, safety data sheets, and shipment conditions should be reviewed to ensure compliance with laboratory use requirements.
- Pre-Quotation Verification: The model, purity, form, size range, pack size, and deposition-source compatibility must all be confirmed before quotation.
Why is e-beam evaporation preferred over thermal evaporation for this rhodium wire?
E-beam evaporation is preferred because rhodium has a high melting point of 1,966°C and requires controlled heating to avoid contamination or damage to thermal sources. Thermal evaporation is only suitable for thin charges in qualified setups using water-cooled e-beam hearths or W/Ta supports by RFQ.
What evaporation source hardware is compatible with this rhodium wire?
This rhodium wire is compatible with water-cooled e-beam hearths or tungsten/tantalum supports by RFQ. The wire form with diameter 1.0 mm is designed for direct loading into these source configurations.
What documentation should be reviewed before purchasing this rhodium evaporation material?
Buyers should review the certificate of analysis (CoA), safety data sheet (SDS), shipment conditions (e.g., hazardous material shipping), and export requirements against their laboratory use needs before requesting a quotation.
This rhodium wire evaporation material (99.99% purity, 1.0 mm diameter) is suited for e-beam evaporation in vacuum thin-film deposition, with thermal evaporation limited to specialized setups. The high melting point and density require water-cooled e-beam hearth or refractory metal support baskets, imposing infrastructure prerequisites.
Positive
- High-purity wire form for consistent deposition: The 99.99% purity and 1.0 mm wire form ensure predictable evaporation behavior and clear procurement matching for thin-film workflows.
- E-beam evaporation compatibility: The material is preferentially suited for e-beam evaporation, enabling controlled deposition of high-melting-point rhodium films with standard equipment.
Trade-offs
- Limited thermal evaporation support: Thermal evaporation is only supported for thin charge or qualified setups, restricting direct use in standard thermal evaporators without process validation.
- Specialized hardware requirements: With a melting point of 1,966 °C and density 12.4 g/cm³, the material requires water-cooled e-beam hearth or W/Ta support baskets, increasing infrastructure demands.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
